Advertisement
Advertisement
Table of Contents
Related Manuals for ACEMIRO RGB-T6032
Summary of Contents for ACEMIRO RGB-T6032
- Page 1 INSTALLATION MANUAL...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using an electrical furnishing, basic precautions should always be followed ,including the following: WARNING: To reduce the risk of burns,fire,electric shock or injury to persons. Use this furnishing only for its intended use as described in these instructions. - Page 3 HARDWARE AND TOOLS ( Tools not included) Power Drill Mallet Tape Measure Safety Goggles Drill Bits Pencil Level HARDWARE LISTS ITEM IMAGE NAME Mounting Screw Wall Anchor Aluminum Alloy Mounting Bar Aluminum Corner Support...
-
Page 4: Installation Instructions
INSTALLATIONINSTRUCTIONS APPLY TO BELOW STYLE OF LED MEDICINE CABINET Please read carefully and save these instructions Don't discard any of the packaging until you are sure that you have all of the parts and the fitings Make sure power to the junction box is off before commencing installation. IMPORTANT 1. - Page 5 SURFACE MOUNT INSTRUCTION Step 1 Step 2 Measure and mark the back mounting holes on the wall. Draw horizontal line connecting the marked location. Unpack the LED medicine cabinet and The line should be level. prepare tools needed. Adjust to level if necessary. Step 4 Step 3 Attach the mounting bar hanger to the wall...
- Page 6 Connect hardwire to power line. Step 5 Make sure the power off (Voltage:AC110-12V,50/60Hz) Step 6 Hang the cabinet on the wall; don't remove your hands until its safety.
- Page 7 Step 7 Connect the lower end of wall with the cabinet body by using the corner support. Step 8 Adjust the shelf to suitable position. sider for adjustable shelyes, adjustable glass shelves unscrew and adjust the position of shelf directly and then tighten the screw for mixed.
- Page 8 Step 9 Hinge adjustment.
- Page 9 Removing door latch: 1.Take off the hinge cover(1). 2.Press down forcefully on the rear end of the hinge chain arm(2). Installing door latch: 1.Attach the hook of the hinge arm to the hinge base. (hook(A) onto catch(B) ) 2.Press down firmly on the rear end of the hinge arm. (Using strong force, push down on the section(C) ) 3.Put on the hinge cover(1).
- Page 10 INTRODUCTION OF TOUCH FUNCTION Click this button turn the defogger ON/OFF. 1. Click the CCT power button to turn the light ON/OFF. Click again to choose the light(natural light/warm yellow/white light). Long press the button to make the light gradually dims. Long press the button again and the light gradually brightens.
- Page 11 RGB-L2032 RGB-L2432 RGB-D3032 RGB-D3632 RGB-T6032 SKU# A - Width RGB-L2032 B - Height C - Depth RGB-L2432 RGB-D3032 Unit: Inch RGB-D3632 RGB-T6032 Note: All dimensions & specifications are approximate and subject to change without notice. Customer Service: For any questions or queries regarding our products, please contact our support team：...
Need help?
Do you have a question about the RGB-T6032 and is the answer not in the manual?
Questions and answers
Is there a light sensor so the light does not turn on when the room is already brightly lit?
how many degrees does the door open Acemiro Lighted Vanity