Sander Fresh-Skim 200 Instruction Manual

Instruction Manual
Fresh Water Protein Skimmer
Skimming System in connection with air pump and water pump
The Fresh Skim 200 is suitable for garden ponds of 10 to 20 m³, breeding basins up to 5 m³
or bigger sized fresh water aquaria.
This highly efficient skimmer is operated in a bypass mode, e.g. not the whole contense of
the pond (basin) will be let through the skimmer in one run. It should be placed so that it will
be fed directly from the relevant reservoir.
By pumping water through ceramic air stones, bubbles are produced, creating a foam which
will finally carry out protein and dirt particles into the foam beaker.
The beaker can be taken off for cleaning. It can take up a great amount of foam; for a
continuous outflow a foam outlet can be installed.
If you use ozone we recommend to controle the redoxpotential (between 300-400mV) at the
water outlet of the skimmer.
Erwin Sander Elektroapparatebau GmbH
Am Osterberg 22
D-31311 Uetze-Eltze
Tel +49 5173 971 0
info@aqua-sander.de
www.aqua-sander.de
Fresh-Skim 200
Page: 1