Advertisement
Advertisement
Table of Contents
Related Manuals for Kolin KWD-TL28SB
Summary of Contents for Kolin KWD-TL28SB
- Page 2 Thank you for choosing Kolin Water Dispenser. Kolin Philippines International Inc. offers a wide range of products that will give convenience and comfort to your homes and businesses. Our new water dispenser aims to provide you with the best hot and cold water dispensing experience. We strive to offer you a product that is safe, durable, and innovative for you to get the best result.
-
Page 4: Table Of Contents
Safety Precautions Product Specification Product Features and Parts Installation Operation Proper Cleaning and Maintenance Troubleshooting... -
Page 5: Safety Precautions
To reduce the risk of injury, fire, or electric shock, the user must read this entire manual before installing, operating, and maintaining the appliance. This product dispenses water at extreme temperatures. Failure to follow the instructions in this manual correctly can cause personal injury or property damage. Do not store or use gasoline or any other flammable vapors or liquids in the vicinity of the water dispenser. -
Page 6: Product Specification
Product Specification Model Name : KWD-TL28BS Hot water capacity : 5L/h Hot water power input : 550 W Hot water temperature range : 88 °C to 90 °C Cold water capacity : 2.5L/h Cold water power input : 80 W Cold water temperature range : 6 °C to 10 °C Unit Dimension... -
Page 8: Installation
Installation Unpacking of Water Dispenser • Remove the straps from the box, but DO NOT flip it over or lean it on its side. • Open the box and remove the upper protective cover of the package. • • Lift the carton box up vertically. •... -
Page 9: Operation
Operation WARNING • Do NOT use other liquids such as coffee, teas, juices or beers. This unit is designed for water dispensing only. • Do NOT use alternative bottles. The water bottles designed for this dispenser are 3 and 5 gallons only. Initial Set-up Allow the unit to sit upright for 2 hours. - Page 10 Dispensing Cold & Normal Temperature Turn on the cooling switch on the back of the water dispenser after plugging it in. The cooling system will activate, and the green LED indicator on the front panel will turn on. The green light will switch off when the water reaches the desired temperature (5–10 °C).
-
Page 11: Proper Cleaning And Maintenance
Proper Cleaning and Maintenance • Remove the power plug or disconnect from the mains before performing any maintenance or servicing on the product. Never use detergent or chemicals harmful to health to clean the water tanks. • Do not directly spray water on the surface of the product. •... -
Page 12: Troubleshooting
Troubleshooting You can solve many common water dispenser problems easily, saving you the cost of a possible service call. Try the suggestions outlined below to see if you can solve them before calling the service center. Problem Possible Cause Water dispenser does not •... - Page 14 The design and specifications are subject to change without prior notice for prod- uct improvement. Any updates to the manual will be uploaded to the service website, please check for the latest version. If you have any concerns, please contact us at the following: Customer hotline: (02) 8852 6868 Text hotline:...
Need help?
Do you have a question about the KWD-TL28SB and is the answer not in the manual?
Questions and answers