Subscribe to Our Youtube Channel
Related Manuals for Kolin KWD-BLC-2088B
Summary of Contents for Kolin KWD-BLC-2088B
- Page 1 OWNER’S MANUAL MODEL: KWD-BLC-2088B BOTTOM LOAD WATER DISPENSER • KEEP THIS MANUAL IN GOOD CONDITION • PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE PRODUCT • THE IMAGE IS FOR REFERENCE ONLY, ACTUAL UNIT MAY DIFFER FROM THE IMAGE ABOVE...
- Page 2 To Users Thank you for choosing Kolin as your trusted brand for water dispensers. We appreciate your confidence in our products. Before installing and using the water dispenser, we kindly request you to carefully read and understand this instruction manual. This will enable you to effectively utilize and operate the product to its fullest potential.
-
Page 3: Table Of Contents
Product Introduction Safety Precaution Product Features and Parts Product Specification Installation and Usage Methods Proper Cleaning and Maintenance Troubleshooting... -
Page 4: Product Introduction
Product Introduction The Kolin Water Dispenser is designed to provide you with convenient access to cold, hot, and room temperature water whenever you need it. Whether you're enjoying a refreshing glass of chilled water, brewing a cup of tea or coffee with hot water, or simply hydrating with room temperature water, this dispenser offers a reliable and efficient solution. - Page 5 • In case of water leakage, immediately switch off the power and drain all water from the product. Contact our Kolin hotline number or your local dealer for assistance by professional service personnel. Do not attempt repairs yourself. PROHIBITION •...
-
Page 6: Product Features And Parts
Prior to usage, carefully examine the power cord and plug for any signs of damage. If any damage is detected on the power cord, please contact our Kolin Hotline for professional assistance to ensure safety and avoid potential hazards. It is crucial not to modify the power plug or extend the power cord in order to prevent fire hazards. -
Page 7: Product Specification
Packing List Water dispenser Owner’s Manual Product Specification Heating and Cooling - Type Water Function Dispenser Rated 230V~, 60Hz voltage/ frequency Heating Power 550W Water Heating Capacity 5.0L/ h 85 - 95℃ Cooling Power Water Cooling Capacity 2.0L/ h 5 - 10℃ Ambient Temperature 10℃... -
Page 8: Installation And Usage Methods
Installation and Usage Methods Installation: 1. Unpacking of the Water Dispenser: • Remove the straps from the box, but avoid flipping it over or leaning it on its side. • Open the box and remove the upper protective cover of the packaging. •... - Page 9 Dispensing Hot Water Turn on the power switch (red) on the back of the product. The power lamp will be on, and the water pump will start pumping water. Wait for 1 to 2 minutes. During this time, the product will enter the water replenishment state, and the water shortage indicator will light up.
- Page 10 Dispensing Cold & Normal Temperature Turn on the cooling switch (green) located on the back of the water dispenser after plugging it in. Once the cooling switch is turned on, the cooling system will activate, and you will see the green LED indicator on the front panel illuminate. (Note that the heating switch must be switched on in order to activate the cooling system and pump).
-
Page 11: Proper Cleaning And Maintenance
Follow these steps to replace the water container: Open the door of the water dispenser and position the filled water container at the appropriate distance. Remove the cap and extraction pipe from the empty water container, and securely tap it onto the cap of the new filled water container to transfer the extraction pipe. Insert the extraction pipe into the bottle, ensuring a proper and secure connection for smooth water flow. - Page 12 1. Removing Existing Water: A. Turn off the heating and cooling switches on the back of the dispenser. B. Disconnect the power plug from the wall outlet. C. Gently rotate the dispenser 90° in either direction and carefully move it away from the wall.
- Page 13 4. Rinsing Storage Tanks: Fill a water container with tap water and insert the suction pipe into the container,ensuring that the extraction pipe securely connected. Insert the water container securely to the designated space in the dispenser. Close the cabinet door securely. Plug the unit into a nearby power source.
-
Page 14: Troubleshooting
Pump not working within the specified time is properly connected. 3.Turn off the hot switch button, then turn it on again If the problem persists or for any other concerns, please reach out to our Kolin Service Hotline for professional assistance. - Page 15 If you have any concerns, please contact us at the following: Customer hotline: (02) 8-852-6868 Text hotline: (0917)-811-8982 Email: customerservice@kolinphil.com.ph Also, please like and follow us on our following social media accounts: Facebook: Kolin Philippines Instagram: kolinphilippines Youtube: kolinphilippines KPII072023 Page 12 ...
Need help?
Do you have a question about the KWD-BLC-2088B and is the answer not in the manual?
Questions and answers