StarTech.com 4N515S8-POWER-STRIP Quick Start Manual

Industrial Power Strip with Surge Protection
This Quick-Start Guide provides setup information for the following StarTech.com Products:
4N515S8-POWER-STRIP
Product Diagram
*4N515S8-POWER-STRIP Model Shown
2
1
4 5 6
Package Contents
• Power Strip x 1
• Foot Pads x 4
• Quick-Start Guide x 1
Requirements
• Available AC Power Source (NEMA 5-15R Outlet)
• Painters Tape (Optional for Temporary Mounting)
• Phillips Head Screwdriver (Optional for Temporary Mounting)
• Drill with a 9/64 in. Drill-Bit (Optional for Temporary Mounting)
For the latest drivers, manuals, product information, technical specifications, and
declarations of conformance, please visit:
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
6.4" (162.7mm)
6N515S8-POWER-STRIP
7
3
3
7
• Mounting Screws x 4
• Mounting Template x 1
www.StarTech.com/support
8.0" (162.7mm)
8N515S12-POWER-STRIP
Component
1 Built-in Power Cable
Power Switch, LED &
2
Circuit Breaker
3
Outlets
4
Protection Present LED
5
Fault LED
6 Line Ok LED
Key-Hole Mounting
7
Points (x4)
Installation
Connecting the Power Strip to an AC Power Source and Downstream
AC Device(s)
1. Connect the Built-in Power Cable, on the Power Strip, to an Available AC Power
Source (NEMA 5-15R Outlet).
2. Connect the AC input, on the downstream device(s), to an available Outlet, on the
Power Strip.
The Power Strip is now connected to an AC power source and Downstream device(s).
Quick-Start Guide
9.6" (242.7mm)
Function
• Connect to an AC Power Source
• NEMA 5-15P Connector
• 125V AC / 15A
• Turns all Outlets On or Off
• Illuminates Red When the Outlets are Turned On
• Turns-Off All Power, in the Event of a Power Surge
• 15A Tripping Point
• Connects to an AC Input on Downstream Device(s)
• NEMA 5-15R Connector
• 125V AC / 15A
• Illuminates Green, When the Surge Protection on
the Power Strip is Functioning Correctly
• Illuminates Red When the Power Source that the
Power Strip is Connected to is Wired Incorrectly
• Illuminates Green When the Power Source that
the Power Strip is Connected to is Wired Correctly
• Temporarily Mount the Power Strip to a Surface
Manual Revision: December 17, 2023