Table of Contents
Advertisement
Quick Links
Instruction Manual
24 Outlet 125V 15A Rackmount Power Strip
RKPW247015
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Packaging Contents
• 1 x Power Strip
• 4 x Mounting Bracket
• 4 x Mounting Screw
• 4 x Backing Plate
System Requirements
• 42U of available internal Rack/Cabinet space
• 125VAC electrical outlet with NEMA 5-15 connector
Specifications
Connector Type(s)
24 - NEMA 5-15 Power (North America) Receptacle
Maximum Output
Voltage
Nominal Input Voltage
Nominal Output
Voltage
Regulatory Derated
Input Current (North
America)
Warranty
Cable Length
Carton Quantity
Color
Product Height
Product Length
Product Weight
Product Width
Shipping (Package)
Weight
Maximum Input
Current per Phase
Maximum Total
Current Draw per
Phase
For the most up-to-date information, please visit: www.startech.com
1 - NEMA 5-15 Power (North America) Plug
125V
120V
120V
12A
Lifetime
10 ft [3 m]
6
Black
72.05 in [1830 mm]
1.5 in [38 mm]
6.63 lb [3 kg]
0.98 in [25 mm]
5.77 lb [2.6 kg]
15A
15A
Installation
1. Locate an appropriate spot inside the rack to mount the power
strip, such as vertical side-mounting rails.
NOTE: The power strip can be mounted vertically or horizontally
to other surfaces, however mounting "up-side down" with the
power sockets facing downwards is not recommended. The weight
of the power strip and connected cables/peripherals in addition to
any downward force (i.e. the force of pulling cables from the power
sockets) could dislodge the power strip from the brackets.
2. Attach the mounting brackets to the rack first, using the provided
screws and backing plate. Place the backing plate behind the
rack's mounting post and place the mounting bracket in front.
The screw threads in from the mounting bracket side. Ideally the
mounting brackets should be evenly spaced across the entire
length of the power strip to provide the most stability.
3. The power strip can be snapped into the mounting brackets.
There are small grooves that run along the sides of the power
strip that the brackets latch onto.
4. Plug the power strip into an electrical outlet and toggle the power
switch to the 'on' position to energize the strip.
*actual product may vary from photos
Manual Revision: 04/05/2012
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for StarTech.com RKPW247015
Summary of Contents for StarTech.com RKPW247015
- Page 1 3. The power strip can be snapped into the mounting brackets. Product Weight 6.63 lb [3 kg] There are small grooves that run along the sides of the power Product Width 0.98 in [25 mm] strip that the brackets latch onto. Shipping (Package) 4. Plug the power strip into an electrical outlet and toggle the power 5.77 lb [2.6 kg] Weight switch to the ‘on’ position to energize the strip. Maximum Input Current per Phase Maximum Total Current Draw per Phase For the most up-to-date information, please visit: www.startech.com Manual Revision: 04/05/2012...
- Page 2 FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders. Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.
Need help?
Do you have a question about the RKPW247015 and is the answer not in the manual?
Questions and answers