Subscribe to Our Youtube Channel
Related Manuals for golmar ART 5W/Gtwin
Summary of Contents for golmar ART 5W/Gtwin
- Page 1 TECNOLOGY Gcall Configurator For ART 5W/Gtwin Monitor APP GCALL CONFIGURATOR N REV.0124...
-
Page 2: Table Of Contents
GCALL CONFIGURATOR APP FOR ART 5W/GTWIN MONITOR INDEX 1. THE CALL CONFIGURATOR ........................3 2. CREATE A NEW ACCOUNT OR USE A SAVED ACCOUNT ................4 2.1. CREATE NEW ACCOUNT ......................... 4 2.2. USE A SAVED ACCOUNT (LOGIN) ......................5 3. -
Page 3: The Gcall Configurator App
APP. ANDROID IMPORTANT: When setting up call forwarding on the ART 5W/Gtwin monitor for the first time, you must first use the Gcall Configurator App and then use the Gcall App Android or iOS to link the user's smartphone with the master ART 5W/Gtwin monitor, (see GCall manual). -
Page 4: Create A New Account Or Use A Saved Account
CREATE A NEW ACCOUNT 2.1. CREATE NEW ACCOUNT OR USE A SAVED ACCOUNT Users do not normally have a Golmar Cloud account. To be able to use the App you need to create an account From this screen, it is therefore possible to create one or log in with an account already registered. -
Page 5: Use A Saved Account (Login)
GCALL CONFIGURATOR APP FOR ART 5W/GTWIN MONITOR In this case, too, the user will be automatically referred to the Home Page . USE A SAVED ACCOUNT (LOGIN) 2.2. Note that up to four smartphones can be If, however, the user already has a sip.account registered on one account while the same (e.g. -
Page 6: Deviceconfiguration
GCALL CONFIGURATOR APP FOR ART 5W/GTWIN MONITOR DEVICE CONFIGURATION The meaning of the buttons on the Homepage is as configure your device, firstly create an account follows: (or log in using an existing account), as explained in 1. Press the ”Deviceconfiguration” button to configure the “... - Page 7 GCALL CONFIGURATOR APP FOR ART 5W/GTWIN MONITOR Press the “ ART 5W/GTWIN“ ’ button on On the settings screen select the app, the following screen appears: the "Call forwarding" option and confirm by pressing the "OK" button. Press the menu button on the...
- Page 8 GCALL CONFIGURATOR APP FOR ART 5W/GTWIN MONITOR After a few seconds the video door phone will switch to configuration mode and a QR code will appear on the display. After the video door phone displays the QR code, Device name press the “Continue ”...
- Page 9 GCALL CONFIGURATOR APP FOR ART 5W/GTWIN MONITOR 1 . 2 Connected via a modem/router to the Internet. Connection to the home LAN must be over Wi-Fi. After setting the intervals (the operation caneven not be done) press “ Continue” and yes will go to the “IP...
- Page 10 GCALL CONFIGURATOR APP FOR ART 5W/GTWIN MONITOR 1 . 7 Pressing the “ Save” key allows the device to store the configuration . 1 . 5 Enter the following values in the empty fields: Address, Subnet Mask, Default Gateway and DNS (e.g.: 8.8.8.8) then press “...
-
Page 11: Device Test
IMPORTANT: The auto switch function will not be available if the ART 5W/GTWIN is configured in "High rise block" mode , see page 1 . 3 2. Select auto-on, press the “... - Page 12 GCALL CONFIGURATOR APP FOR ART 5W/GTWIN MONITOR will no longer be possible to switch to displaying next door unit or camera and the “ Cameras ” button Please select the device for will be replaced by the “ Mute ”...
- Page 13 GCALL CONFIGURATOR APP FOR ART 5W/GTWIN MONITOR Open gate Mute Terminate Open door 7. The following page will appear: Quality icon shows the quality of the conversation b ased on the Internet connection your smartphone: High Medium Press the button...
-
Page 14: Device Replacement
GCALL CONFIGURATOR APP FOR ART 5W/GTWIN MONITOR Select the button for the device to be replaced: Reminder: After the test, the user's smartphone must be paired with the main monitor to activate the — ART 5W/GTWIN function with the Android or iOS GCall App... -
Page 15: Firmware Upgrade
GCALL CONFIGURATOR APP FOR ART 5W/GTWIN MONITOR FIRMWARE UPGRADE Attention: If the ART 5W/GTWIN monitor is configured firmware ART 5W/GTWIN monitor can be updated in " Condominium " mode, it is not possible to update over the Gcall Configurator app. Proceed as follows: the firmware with the Gcall Configurator App. - Page 16 GCALL CONFIGURATOR APP FOR ART 5W/GTWIN MONITOR 9. The “Status ” parameter will change to “ On” mode 12. Press the “ Start ” button to continue the procedure. after a few seconds on the display of the monitor. Firmware update 10.
-
Page 17: User Account
GCALL CONFIGURATOR APP FOR ART 5W/GTWIN MONITOR USER ACCOUNT Firmware upgrade On the Homepage, press the “ User Account” button. Current firmware version: 1.0.0_Golmar_2319 New firmware version: 1.0.0_Golmar_2320 Release notes: The firmware upgrade is characterised by an orange band at the top of the screen. -
Page 18: Settings
GCALL CONFIGURATOR APP FOR ART 5W/GTWIN MONITOR — Pressing the “ Change password ” button is possible 9. EXIT change your password. Press the “ Exit ” button on the Homepage to exit the Gcall Configurator app. — Pressing the “Logout ”... - Page 19 GCALL CONFIGURATOR APP FOR ART 5W/GTWIN MONITOR NOT S...
- Page 20 C/ Silici, 13 08940- Cornellá de Llobregat SPAIN Golmar se reserva el derecho a cualquier modificación sin previo aviso. Golmar se réserve le droit de toute modification sans préavis. Golmar reserves the right to make any modifications without prior notice.
Need help?
Do you have a question about the ART 5W/Gtwin and is the answer not in the manual?
Questions and answers