Sony STR-DG710 - 5.1 Channel Audio/video Receiver Operating Instructions Manual page 5

To Enjoy STB (Set Top Box) digital sound or digital satellite tuner sound
from the system (Models with DIGITAL IN (COAXIAL or OPTICAL) jack
only)
You can enjoy digital sound of STB or a digital satellite tuner from speakers of this system by
performing to following connections and settings. Connect to a TV with the HDMI IN jacks by an
HDMI cord (not supplied) (make sure to connect from the smallest number). The names of HDMI
inputs in the following illustration are examples.
By connecting as the following illustration, you can enjoy Multi Channel Broadcasted Audio from the
speakers of the system.
Video signal
Sound signal
to HDMI 2 (HDMI cord)
Sets the [STB SYNCHRO] to [ON].
1
Press "/1.
2
Press DISPLAY when the system is in stop mode.
3
Press X/x to select
4
Press X/x to select [CUSTOM], then press
5
Press X/x to select [CUSTOM SETUP], then press
6
Press X/x to select [STB SYNCHRO], then press
7
Press X/x to select the setting.
The default setting is underlined.
• [OFF]: sets the [STB SYNCHRO] function to off.
• [ON]: sets the [STB SYNCHRO] function to on.
8
Press .
The setting is made. Select the HDMI input of your TV connected to the STB or digital satellite
tuner. The system accepts the signal from the SAT/CABLE jacks automatically and outputs the
sound of the STB or digital satellite tuner from the speakers of the system.
Tip
• You can operate this function on STB or a digital satellite tuner which is not correspond with HDMI CONTROL.
DAV
Digital Sound (Coaxial/Optical cord)
[SETUP], then press
TV
to HDMI 1 (HDMI cord)
.
.
.
.
GB US
STB
5
US