Sony STR-DA6400ES - Multi Channel Av Receiver Network Manual page 28

9
Press V/v/B/b and
character one by one to enter the IP
address.
10
Press V/v/B/b to select "Finish," then
press .
11
Press b to display the next screen.
12
Repeat the process in steps 8 to 11
again to enter the Subnet mask,
Gateway address, Primary DNS
address, and Secondary DNS address.
13
Press V/v to select "Test Connection,"
then press .
"Success! Your drive is now connected to
your network." appears on the TV screen.
14
Press to select "Finish."
To set the Proxy server
manually
1
Press AMP.
The receiver can be operated using the
remote.
2
Press MENU.
The menu is displayed on the TV screen.
3
Press V/v repeatedly to select
" Settings," then press
4
Press V/v repeatedly to select
"Network," then press
5
Press V/v repeatedly to select
"Network Setup" then press
6
Press V/v repeatedly to select "Proxy
setup," then press
7
Press V/v repeatedly to select
"Enable," then press
8
Press .
The soft keyboard appears on the TV
screen.
9
Press V/v/B/b and
character one by one to enter the proxy
server address.
28
GB
to select a
or b.
or b.
.
.
.
to select a
10
Press V/v/B/b repeatedly to select
"Finish," then press
11
Press b to select the port number box,
then press .
The soft keyboard appears on the TV
screen.
12
Press V/v/B/b and
character one by one to enter the port
number.
13
Press V/v/B/b repeatedly to select
"Finish," then press
14
Press b.
15
Press V/v repeatedly to select "Finish,"
then press .
.
to select a
.