Harbor Freight Tools Bauer 2181CR-B Owner's Manual

20 v 3-speed 1/4" impact driver

Advertisement

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
20 V 3-SPEED
1/4" IMPACT DRIVER
email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1‑888‑866‑5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
2181CR-B
tM
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
24f
58847

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Bauer 2181CR-B and is the answer not in the manual?

Questions and answers

Summary of Contents for Harbor Freight Tools Bauer 2181CR-B

  • Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
  • Page 2: Table Of Contents

    table of contents Safety ..............2 Maintenance ............9 Specifications ............6 Parts List and Diagram ..........10 Setup ..............6 Warranty ..............12 Operation ..............8 WarninG SyMBOLS anD DeFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
  • Page 3: Safety

    c. Hold the power tool by insulated j. Do not lay the tool down until it has come to gripping surfaces, when performing a complete stop. Moving parts can grab the an operation where the fastener may surface and pull the tool out of your control. contact hidden wiring.
  • Page 4 If unreadable or missing, contact damage the battery and increase the risk of fire. Harbor Freight Tools for a replacement. j. Have servicing performed by a qualified repair person using only identical 6. Battery tool use and care replacement parts.
  • Page 5 7. Lithium Battery Safety Warnings 8. Vibration Safety This tool vibrates during use. Repeated or long‑term exposure to vibration may cause temporary or permanent physical injury, particularly to the hands, arms and shoulders. To reduce the risk of vibration‑related injury: a.
  • Page 6: Specifications

    Grounding tO preVent eLectric SHOcK anD DeatH FrOM incOrrect GrOunDinG: check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the charger. Do not use the charger if the power cord or plug is damaged.
  • Page 7 tool Set up tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: Make sure that the trigger is in the off-position and remove its Battery pack before performing any procedure in this section. Battery charging Charge Battery Pack after unpacking and before using this tool. Follow instructions included with Battery Pack and Charger.
  • Page 8: Operation

    Operating instructions read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. 1. Make sure that the Trigger is in the off‑position nOtice: Do not change direction of rotation while chuck is rotating.
  • Page 9: Maintenance

    Maintenance procedures not specifically explained in this manual must be performed only by a qualified technician. t O preVent SeriOuS inJury FrOM acciDentaL OperatiOn: Make sure that the trigger is in the off-position and remove the Battery pack before performing any procedure in this section. tO preVent SeriOuS inJury FrOM tOOL FaiLure: Do not use damaged equipment.
  • Page 10: Parts List And Diagram

    parts List and Diagram pLeaSe reaD tHe FOLLOWinG careFuLLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
  • Page 11 assembly Diagram Item 58847 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.

Table of Contents