1. Manuals
  2. Brands
  3. Harbor Freight Tools Manuals
  4. Impact Driver
  5. Bauer 2085CR-B
  6. Owner's manual & safety instructions

Harbor Freight Tools Bauer 2085CR-B Owner's Manual & Safety Instructions

20v brushless 3-speed high torque 1/2" impact wrench
Hide thumbs

Advertisement

Table of Contents

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the back
of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt
in a safe and dry place for future reference.
20V BRUSHLESS 3-SPEED HIGH TORQUE
1/2" IMPACT WRENCH
email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1‑888‑866‑5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
2085CR-B
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
24f
58514

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Bauer 2085CR-B and is the answer not in the manual?

Questions and answers

Related Manuals for Harbor Freight Tools Bauer 2085CR-B

Summary of Contents for Harbor Freight Tools Bauer 2085CR-B

  • Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.

  • Page 2: Important Safety Information

    table of contents Safety ............2 Operation ............ 9 Specifications ..........7 Maintenance ..........10 Warranty ............ 12 Setup ............7 WarninG SyMBOLS anD DeFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
  • Page 3 c. Hold the power tool by insulated j. Do not lay the tool down until it has come to gripping surfaces, when performing a complete stop. Moving parts can grab the an operation where the fastener may surface and pull the tool out of your control. contact hidden wiring.
  • Page 4 This will ensure that If unreadable or missing, contact the safety of the product is maintained. Harbor Freight Tools for a replacement. k. Do not modify or attempt to repair the power tool or the battery pack except as indicated 6.
  • Page 5 7. Lithium Battery Safety Warnings 8. Vibration Safety This tool vibrates during use. Repeated or long‑term exposure to vibration may cause temporary or permanent physical injury, particularly to the hands, arms and shoulders. To reduce the risk of vibration‑related injury: a.

  • Page 6: Extension Cords

    Grounding tO preVent eLectric SHOcK anD DeatH FrOM incOrrect GrOunDinG: check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the charger. Do not use the charger if the power cord or plug is damaged.
  • Page 7 Specifications Battery Type Bauer 20V Li‑Ion Charger Type Bauer 20V Li‑Ion Electrical Rating 18VDC No Load Speed : 0‑1800/min 0‑700 RPM Speed 0‑1400 RPM 0‑1800 RPM 0‑1100 IPM Impact Rate 0‑1600 IPM 0‑2400 IPM Max Torque 1000 ft‑lb Anvil Size Square Drive: 1/2″...

  • Page 8: Tool Set Up

    tool Set up tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: turn the switch to its off position and remove Battery pack before performing any procedure in this section. charging Battery pack Charge battery after unpacking and before using this tool. Follow instructions included with Battery Pack and Charger.

  • Page 9: Workpiece And Work Area Set Up

    Operating instructions read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Workpiece and Work area Set up 1. Designate a work area that is clean and well‑lit. 3.

  • Page 10: Cleaning, Maintenance, And Lubrication

    Maintenance procedures not specifically explained in this manual must be performed only by a qualified technician. t O preVent SeriOuS inJury FrOM acciDentaL OperatiOn: Make sure that the trigger is in the off-position and remove the Battery pack before performing any procedure in this section. tO preVent SeriOuS inJury FrOM tOOL FaiLure: Do not use damaged equipment.

  • Page 11: Troubleshooting

    troubleshooting problem possible causes Likely Solutions Tool will 1. Battery Pack not properly 1. Remove Battery Pack, make sure there are not start. connected. no obstructions, clean battery contacts on tool, reinsert the Battery Pack according to its shape (it should only fit one way), and press firmly until the Battery Pack locks in place.
  • Page 12 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.

Table of Contents