Ezviz CP3 User Manual
  1. Manuals
  2. Brands
  3. Ezviz Manuals
  4. Intercom System
  5. CP3
  6. User manual

Ezviz CP3 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd. ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of
Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as "EZVIZ"). This user manual (hereinafter
referred to as "the Manual") cannot be reproduced, changed, translated, or distributed, partially or
wholly, by any means, without the prior written permission of EZVIZ. Unless otherwise stipulated,
EZVIZ does not make any warranties, guarantees or representations, express or implied, regarding to
the Manual.
About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information contained
in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please
find the latest version in the
™ website (http://www.ezviz.com).
Revision Record
New release – January, 2024
Trademarks Acknowledgement
™,
™, and other EZVIZ's trademarks and logos are the properties of EZVIZ in various
jurisdictions. Other trademarks and logos mentioned below are the properties of their respective
owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH
ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED "AS IS", WITH ALL FAULTS AND ERRORS,
AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS, OFFICERS,
EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH
THE USE OF THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ'S TOTAL
LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT.
EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE AS
THE RESULT OF PRODUCT INTERRUPTION OR SERVICE TERMINATION CAUSED BY: A) IMPROPER
INSTALLATION OR USAGE OTHER THAN AS REQUESTED; B) THE PROTECTION OF NATIONAL OR
PUBLIC INTERESTS; C) FORCE MAJEURE; D) YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT
LIMITATION, USING ANY THIRD PARTY'S PRODUCTS, SOFTWARE, APPLICATIONS, AND AMONG
OTHERS.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY
AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK,
VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL PROVIDE
TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS AND DATA PROTECTION
LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION
BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE
APPLICABLE LAW. EZVIZ SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH
ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATTER
PREVAILS.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CP3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ezviz CP3

Summary of Contents for Ezviz CP3

  • Page 1 INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ’S TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT.

  • Page 2: Table Of Contents

    1� Get the EZVIZ App ����������������������������������������������������������������������������������������������������������������������������������������� 5 Charge the Chime �������������������������������������������������������������������������������������6 Add Chime to EZVIZ ����������������������������������������������������������������������������������7 What if you failed to add the chime to EZVIZ? ���������������������������������������������������������������������������������������������������� 7 Link Doorbell with Chime ��������������������������������������������������������������������������8 1� Power on the Doorbell ���������������������������������������������������������������������������������������������������������������������������������� 8 2�...

  • Page 3: Overview

    Overview 1� Package Contents Drill Template Doorbell (x1) Plate Foam (x1) Mounting Plate (x1) Drill Template (x1) Chime (x1) Pin (x1) Screw Kit (x1) Power Cable (x1) Regulatory Information (x2) Quick Start Guide (x1)

  • Page 4: 2� Basics

    2� Basics Doorbell Mounting Hole with Anti-tamper Alarm Function Lens Power Button* Light Sensor LED Indicator* Doorbell Button Mounting Hole Power Port Behind the cover Speaker...
  • Page 5 Dismantle Hole Insert the pin into it to disassemble the doorbell Name Description LED Indicator Slow-flashing Red: Charging. Solid Red for 3s and off: Battery power below 20% and the doorbell is awoken. Solid Blue: Fully charged but still connected to the power adapter. Solid Blue for 3s and off: Battery power above 20% and the doorbell is awoken.
  • Page 6 Micro SD Card It is recommended to install a micro SD card, which should be purchased separately: (sold separately) • Initialize the card in the EZVIZ app before using it. • Recommended compatibility: Class 10, maximum space 512GB. LED Indicator Solid Red: Device is starting up/resetting.

  • Page 7: Setup

    1� Get the EZVIZ App 1. Connect your mobile phone to Wi-Fi using your 2.4GHz network. 2. Download and install the EZVIZ app by searching “EZVIZ” in the App Store or Google Play 3. Launch the app and register an EZVIZ user account.

  • Page 8: Charge The Chime

    Charge the Chime Connect the chime to an indoor power source. When the indicator light fast-flashes blue, it means the chime is ready for Wi-Fi configuration. Use the EZVIZ app for Wi-Fi configuration (refer to the next section "Adding to the EZVIZ" for details). Chime Power Outlet Please install the chime on the power outlet closest to the location where the doorbell is to be installed, in order to avoid doorbell and chime connection failure due to distance. The installation effect is shown in the...

  • Page 9: Add Chime To Ezviz

    2. On the Home screen, tap “+” on the upper-right corner to go to the Scan QR Code interface. 3. Scan the QR code on the Quick Start Guide cover or on the top of the chime. 4. Follow the EZVIZ app wizard to finish Wi-Fi configuration. What if you failed to add the chime to EZVIZ? Situation 1 LED Indicator fast-flashing blue and the chime emits a long beep sound three times.

  • Page 10: Link Doorbell With Chime

    Situation 4 LED Indicator solid blue and the chime emits an urgent beep sound twice. Not registered on EZVIZ Please follow the EZVIZ app wizard to start Wi-Fi configuration again. Link Doorbell with Chime 1� Power on the Doorbell 1. Press and hold the power button for 2s in shutdown state, the LED indicator is solid blue for 3s and then goes out, then the device emits a beep sound.

  • Page 11: 2� Check The Linkage

    3. If the doorbell is out of battery, connect it to power outlet with the power adapter (5V 2A, purchase separately) for charging. It is recommended to fully charge the doorbell before you use it for the first time. Power Outlet Doorbell • When charging, the doorbell will automatically turn on. • If you use a 5V 2A adapter to charge the doorbell, it will take about 5 hours to fully charge. • When charging the doorbell, make sure the lens faces upward to avoid fraying the lens.
  • Page 12 Press the doorbell > Chime doesn't ring Link failed Doorway Indoors No ringing What to do? Within 5m Please install the doorbell and chime as close as possible, with the recommended distance being within 5m.

  • Page 13: Installation

    2. After installing the Micro SD card, you should go to Record List in the Device Settings interface of chime to initialize the card in the EZVIZ app before using it. 3. The status will then change to Normal and then videos can be stored.

  • Page 14: 2� Choose The Installation Location

    2� Choose the Installation Location Before installing the doorbell, please make sure that the chime has completed Wi-Fi configuration. After confirming the installation location of the doorbell, press the doorbell to confirm whether the doorbell has successfully linked with the chime. 1.

  • Page 15: 3� Install The Mounting Plate

    3� Install the Mounting Plate Option A (for smooth wall) 1. Stick the plate foam on the mounting plate and then paste it to the wall. Plate Foam Mounting Plate Option B (for uneven wall) 1. Place the drill template on the wall surface, and drill four holes. 2.

  • Page 16: 4� Install The Doorbell

    Mounting Hole Hook Disassemble 1. Go to Device Settings > Message Notification to disable the Tamper Notification in the EZVIZ app. 2. Insert the pin provided into the hole on the top of the doorbell to detach the upper part of the doorbell from the backplate. 3. Push the doorbell upwards and then take it off.

  • Page 17: Maintenance

    1� Charge the Doorbell When the doorbell battery is low, a message will be sent to the EZVIZ app to remind you to charge the doorbell. Please refer to the Disassemble chapter to take off the doorbell then refer to the Power on the Doorbell section to charge it.

  • Page 18: View Your Device On The Ezviz App

    The app interface may be different due to version update, and the interface of the app you installed on your phone shall prevail. Launch the EZVIZ app, tap Live View button, you can view a live feed, take snapshots, record videos, and choose video definition as needed.

  • Page 19: 2� Doorbell Settings

    2� Doorbell Settings In the settings page, you can set the parameters of the doorbell. Parameter Description Name View or tap to customize the name of your device here. Battery You can see the battery remaining capacity here and working mode. Intelligent Detection You can manage the intelligent detection for your device.

  • Page 20: 3� Chime Settings

    You can see the Wi-Fi that the device has connected to. You can see the device information here. Device Information If there is an upgrade message for the device, a reminder will pop up in this column. Delete Device Tap to delete the device from EZVIZ app.

  • Page 21: Ezviz Connect

    EZVIZ Connect 1� Use Amazon Alexa These instructions will enable you to control your EZVIZ devices with Amazon Alexa. If you run into any difficulties during the process, please refer to Troubleshooting. Before you start, make sure that: 1. EZVIZ devices are connected to the EZVIZ app.

  • Page 22: 2� Use Google Assistant

    4. Tap Works with Google, and search for "EZVIZ", where you will find "EZVIZ" skills. 5. Enter your EZVIZ username and password, and tap Sign in. 6. Tap the Authorize button to authorize Google to access your EZVIZ account, so that Google can control your EZVIZ devices. 7. Tap Return to app.

  • Page 23: Initiatives On The Use Of Video Products

    Committed to innovating technology for the good, we at EZVIZ hereby earnestly advocate that every user shall use video products properly and responsibly, thus to collectively create a positive environment where all related practices and usage comply with applicable laws and regulations, respect individuals’...

  • Page 24: Appendix

    Appendix 1� Rechargeable Lithium ion Battery 1. The battery type of the device: Portable battery. 2. The battery of this device is non-removable, which is risky to remove. Chemical Composition CAS No� Weight (%) Chemical Formula Lithium nickel cobalt manganate 182442-95-1  35.48% LiNi Nanotubes...

Table of Contents