Advertisement
Quick Links
Advertisement
Related Manuals for Remer MIRAGE
Summary of Contents for Remer MIRAGE
- Page 1 MIRAGE MAGNIFYING LED MIRROR Page 1/12 MIR AGE INSTALL ATION MANUAL...
- Page 2 TURN MIRROR ON/OFF To turn the device on/off, tap the button under the face of the magnifier. The device also has an auto-on feature that will cause the ring light to turn on when the mirror is removed from the docking station, when station is connected to power.
- Page 3 COLOUR CHANGING Touch and hold the button to change the colour. To switch between colour change and dimming mode, quickly double tap the button. Page 3/12 MIR AGE INSTALL ATION MANUAL...
- Page 4 DIMMER CONTROL Touch and hold the button to dim or brighten the ring light. To switch between dimming and colour change, quickly double tap the button. <10% 100% Page 4/12...
- Page 5 TO CONNECT THE DOCKING STATION TO POWER The charger comes with a micro-USB cable that can be plugged into any USB-A socket. Plug the micro-USB cable into the socket located on the underside of the charging station. The cable can be placed through the gap at the back of the docking station Input 5V and plugged into a USB-A socket.
- Page 6 CHARGING THE MAGNIFIER To charge the magnifier, place onto the docking station. The LED on the station will become red for 10s to indicate that a charging connection has been made. A solid red light means the device is charging. A flashing red light indicates the device is not charging and needs to be removed from the station and replaced to make the charging connection.
- Page 7 REMER MIRROR COMPATABILITY The magnifier can be used with the Remer range of Mirrors which are ordered as a bundle product with Magnifier explicitly mentioned in the product description and code. Your Mirage magnifier can be placed onto the left side of your Remer mirror, please ensure magnetic connection prior to releasing the mirror.
- Page 8 Contains strong magnets. Do not get the docking station wet. Keep away from pacemakers and other medical devices Do not allow the Mirage mirror to fully drain of power for affected by magnets. long periods of time. Do not place on steel or iron surfaces.
-
Page 9: Cleaning And Maintenance
CLEANING AND MAINTENANCE When cleaning the mirror, use a dust-free, microfibre or lint-free cloth with the mirror turned off. Do not use cleaning agents or abrasive materials. For stubborn stains, a damp cloth can be used. The product has been tested to IP55 standards, so is resistant to water splashes. Do not allow the product to be submerged. - Page 10 For any further assistance, please feel free to contact our customer service team at: Remer Pty Ltd 13-15 Edison Road, Dandenong South, VIC 3175 03 9706 6663 info@remer.com.au Remer reserves the right to amend the specification of its products at any time if an opportunity to improve the product occurs. Page 10/12...
- Page 11 COMPLIANCE This product complies with all relevant International safety stationards. MX5MW Input 5V - 2A Output - 5W MAX Page 11/12 MIR AGE INSTALL ATION MANUAL...
- Page 12 Page 12/12...
Need help?
Do you have a question about the MIRAGE and is the answer not in the manual?
Questions and answers