Do you have a question about the FPP-T700 and is the answer not in the manual?
Questions and answers
Edward Fine
April 26, 2025
Unit will not power up when power switch pressed for 2 seconds and the until plugged in.
1 comments:
Mr. Anderson
May 14, 2025
The Forza FPP-T700 may not power up when the power switch is pressed for 2 seconds, even if it is plugged in, due to one or more of the following reasons:
1. The battery may be fully discharged and needs time to charge before the unit can power on. 2. The power button may not have been pressed and held properly for the full 2 seconds. 3. There may be an issue with the power input or cable. 4. Internal protection may have been triggered due to overheating or overloading.
Check the power input connection, ensure the unit has charged sufficiently, and press the power button firmly for 2 seconds.
Top view Operation Guidelines 1. Start up the unit Press the Power button for 2 seconds to turn on the unit. The LCD display will light up, showing the current power and output. The fan will start self-test and the fan indicator will light up. The fan will automatically turn off after 3 seconds LCD display Rear view Left side view...
3. Activate USB output mode. 5. Activate AC output (1) After the unit is turned on, short press the USB button to activate the USB output mode. Type-C and USB output (1) After the device is turned on, short press the AC button to activate the AC output function. The AC frequency indicators will light up on the LCD display.
Troubleshooting Technical specifications FPP-T700 Error codes Capacity 551.25Wh 26.25V 21Ah (3.75V 147Ah) Total outlets 11 all included: 9 output/2 input (DC/AC) Code Description What to do LED lights LED lamp (6W – white light. 5 modes: static hi-lit, static mid-lit, slow-paced...
Page 6
AC outlet and power adapters would be different depending on the location of the customer. Forza Power Technologies LLC. Forza ® is a registered trademark. All rights reserved. All other trademarks and brand names are registered trademarks of their respective owners.
• Panel de control integrado de 4 botones que permite gestionar entradas, salidas y funciones clave: encendido y La serie de centrales eléctricas portátiles Titan de Forza es la solución perfecta para cualquier escenario en el que se apagado/CA/CC/USB/lámpara LED.
Vista superior Instrucciones de operación 1. Cómo encender la unidad Presione el Botón de encender/apagar durante 2 segundos para encender la unidad. La pantalla LCD se iluminará y mostrará el nivel de la batería y la potencia actuales. El ventilador iniciará una autocomprobación y el indicador del ventilador se iluminará. El ventilador se apagará automáticamente después de 3 segundos.
Page 9
3. Activar el modo de salida USB 5. Activar el modo de salida de CA (1) Con la unidad encendida, presione el botón USB para activar el modo de salida USB. Los indicadores de modo (1) Con la unidad encendida, presione brevemente el botón de CA para activar la función de salida de CA. Los de salida USB-A y USB Tipo C se iluminarán en la pantalla LCD.
Solución de problemas Especificaciones técnicas FPP-T700 Códigos de error Capacidad 551.25Wh 26.25V 21Ah (3.75V 147Ah) Total de tomas 11 en total: 9 salidas/2 entradas (CC/CA) Código Descripción Qué hacer Luces LED Lámpara LED (6W -luz blanca - 5 modos: estática de baja intensidad / estática de alta Sobrecarga de salida CC Después de eliminar la sobrecarga, presione el botón CC...
Page 11
CA estándar para el funcionamiento normal y diario de electrodomésticos y herramientas del hogar o la oficina. El tomacorriente de CA y los adaptadores de corriente pueden ser diferentes según la ubicación del usuario. Forza Power Technologies LLC. Forza es una marca registrada. Todos los derechos reservados. Todas ®...
Need help?
Do you have a question about the FPP-T700 and is the answer not in the manual?
Questions and answers
Unit will not power up when power switch pressed for 2 seconds and the until plugged in.
The Forza FPP-T700 may not power up when the power switch is pressed for 2 seconds, even if it is plugged in, due to one or more of the following reasons:
1. The battery may be fully discharged and needs time to charge before the unit can power on.
2. The power button may not have been pressed and held properly for the full 2 seconds.
3. There may be an issue with the power input or cable.
4. Internal protection may have been triggered due to overheating or overloading.
Check the power input connection, ensure the unit has charged sufficiently, and press the power button firmly for 2 seconds.
This answer is automatically generated