Parts Info; Placement Instructions - OBSBOT Tiny 2 Lite User Manual

OBSBOT Tiny 2 Lite Overview
About Tiny 2 Lite
OBSBOT Tiny 2 Lite is an AI-powered PTZ webcam equipped with a two-axis gimbal.
It supports a variety of intelligent shooting modes and is supplemented by a variety
of gesture control function to meet users' needs from different scenarios.
OBSBOT Tiny 2 Lite is connected to the computer via USB, plug and play. It also
comes with OBSBOT Center software to expand more advanced functions.
⚠ System Requirements
Windows 10 (64-bit) or later
macOS 11.0 or later
⚠ Recommended for 1080p 60fps and 4K
Recommended Apple computers:
① MacBook Pro (2018, 8th Gen Intel® Core™ i5 Processors or later)
② MacBook Air (2018, 8th Gen Intel® Core™ i5 Processors or later)
③ iMac Retina (2019, 8th Gen Intel® Core™ i5 Processors or later)
Recommended PC configuration:
① CPU: 7th Gen Intel® Core™ i5 Processors or later
② RAM: 8GB
3

Parts Info

01. 4K Ultra HD lens 04. USB-C Port
02. Camera Indicator 05. UNC 1/4-20 Interface
03. Dual Microphones
Setting Up Tiny 2 Lite

Placement Instructions

1. Placement on a Monitor
Please operate as shown in the following figure:
① Open the built-in stand at the bottom of Tiny 2 Lite.
② Place Tiny 2 Lite on the monitor.
③ Adjust the angle of the stand to make the base as parallel as possible to the
horizontal plane.
4