Page 2
One of the most distinctive features of the new One Week is its power reserve indicator. Keeping with the architectural depth of the movement, the power reserve is indicated by a cone system, inspired by pocket watches.
Page 4
WINDING Your manual mechanical watch must be wound regularly for it to work properly. Your One Week has a screwed crown, so first step is to unscrew it counterclockwise. Then turn the crown clockwise in the normal crown position. At the end of the winding process, you will feel some slight resistance.
SETTING THE TIME Unscrew the crown (counterclockwise) and pull it out one click. To ensure correct setting of the time, first rotate the minute hand 5 minutes ahead of the desired time, then go back (by rotating counterclock- wise) to the desired time. Push the crown back and screw it counterclockwise to fi- nalise your time setting.
Page 8
SETTING THE TIME IMPORTANT: do not operate the crown underwater or when the watch is wet. Al- ways push the crown back to the normal position once the settings have been made.
POWER RESERVE INDICATOR One of the most distinctive features of the new One Week is its power reserve indicator. Keeping with the architectural depth of the movement, the power reserve is indicated by a cone system, inspired by pocket watches. This consists...
Page 12
POWER RESERVE INDICATOR When the power reserve is at its mini- mum, the cone is in the low position and indicates “DOWN”. The watch is then stopped or about to stop.
Page 15
Dear Collector, You are the proud owner of an ARMIN STROM timepiece. Our sin- cere congratulations on your purchase! We hope you derive great pleasure from your watch and thank you for your confi- dence in us. Serge Michel Claude Greisler...
• avoid ex- posing your watch to extreme climatic watch to Armin Strom or an authorized Armin Strom retailer. changes, in particular changes in tempe- rature or humidity such as saunas • take your watch off before you swim in sea- water.
WATER RESISTANCE Your Armin Strom watch is water resistant to 10 ATM / 100 m. The water resistance of a watch can be compromised by external factors (such as shocks, perspiration, cos- metics or salt water) or by the natural aging process of the gaskets. That is why water...
Need help?
Do you have a question about the ONE WEEK and is the answer not in the manual?
Questions and answers