Monitor Output Connector - Harman Kardon AVR 2650 Quick Start Manual

AVR
Connect Your Audio and Video Source Devices
Source devices are components where a playback signal originates, e.g. a Blu-ray Disc™
or DVD player; a cable, satellite or HDTV tuner; etc. Your receiver has several different
types of input connectors for your audio and video source devices: HDMI, component
video, composite video, optical digital audio, coaxial digital audio and analog audio.
The connectors are not labeled for specific types of source devices; they are labeled
numerically, so you can connect your devices according to your individual system's
make-up.
Your receiver's various source buttons have default assignments to different input
connectors (listed in the "Default Source Button" column of the table below). For ease of
setup, you should connect each source device to the connector where the corresponding
default source button is assigned (e.g., connect your Blu-ray Disc player to HDMI 1).
AVR Input Connector
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI 5
HDMI Front
(AVR 3650/AVR 365 only)
Component Video 1
Component Video 2
Composite Video 1
Composite Video 2
Optical Digital Audio 1
Optical Digital Audio 2
Coaxial Digital Audio Input 1
Coaxial Digital Audio Input 2
Analog Audio In 1
Analog Audio In 2
Analog Audio In 3

Monitor Output Connector

HDMI Monitor Out
Composite Video Monitor Out
Record Output Connector
Composite Video Rec Out
Optical Digital Audio Out
4
Connected Component
Connected Component
Connected Component
Input Connections and Assigned Source Buttons
However, you can connect your source devices as you wish and re-assign any of the
source buttons to any of the input connectors listed in the table according to where you
actually connect each of your source devices.
As you connect your various source components, fill out the "Connected Component"
column in the table – it will make it easier for you to assign the various source buttons
after you have completed making all of the connections. (You will make any changes to
the source-button assignments and fill in the "Assigned Source Button" column later in
the setup process.)
Default Source Button
Blu-ray
Cable/Sat
Game
Media Server
TV
Aux
A (red)
B (green)
C (yellow)
D (green)
A (red)
B (green)
C (yellow)
D (green)
— — — —
— — — —
— — — —
— — — —
— — — —
— — — —
Connections
Assigned Source Button
— — — —
— — — —
— — — —
— — — —
— — — —
— — — —