Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Durst Rho 512R
Summary of Contents for Durst Rho 512R
- Page 1 Rho 512R/312R Service Manual – UV System Edition 23.10.2015...
- Page 2 Rho 512R/312R 2015 © Durst Phototechnik AG, UV System, Edition 23.10.2015...
-
Page 3: Table Of Contents
Controller menu level 5 (Error Log) ................13 2.7.1 Displaying the error log .................. 14 Maintaining the UV unit ................15 Diagnostics ....................16 Measuring the UV intensity ..................16 MUC error codes ......................17 2015 © Durst Phototechnik AG, UV System, Edition 23.10.2015... -
Page 4: About This Document
This document is part of the service documentation and contains information on the safe handling of the UV unit of the printer. This information applies to printers of the Rho P10 200/250/HS range of Durst Phototechnik AG and should be referred to by the following personnel:... -
Page 5: Structure Of Warnings
Warnings are structured as follows (shown here as an example: the warning level “WARNING”): WARNING! Type and source of the hazard Consequences of the hazard. Measures for avoiding the hazard. Read the warning and comply with it. 2015 © Durst Phototechnik AG, UV System, Edition 23.10.2015... -
Page 6: Micro Universal Controller (Muc)
The "Lamp ignition" and “Shutter actuation" keys are not operational as long as the controller is receiving a signal from the printer. 2.1.2 Displays Number Meaning Power supply LED Display Status LED Tab. 4: Controller display elements 2015 © Durst Phototechnik AG, UV System, Edition 23.10.2015... -
Page 7: Navigation Within The Controller Menu
Number Meaning UV lamp 1 UV lamp 2 Current EPS power Line for status messages Lamp hour counter Shutter status Lamp status Tab. 6: Meaning of the controller menu level 1 2015 © Durst Phototechnik AG, UV System, Edition 23.10.2015... -
Page 8: Display Status Of The Uv Bulb And The Shutter
(1) and a fault (2). Faults can be assigned to any one of the following three categories: LMP = UV bulb fault EPS = EPS fault HMuC = MUC fault 2015 © Durst Phototechnik AG, UV System, Edition 23.10.2015... -
Page 9: Displaying The Eps Operating Hours, Number Of Switch-On Procedures And The Shutter Movements
In the controller menu level 1, press the down arrow key twice. Number Meaning Controller serial number Controller hour counter Controller type Software version Controller inside temperature Tab. 10: Meaning of the controller menu (controller parameters) 2015 © Durst Phototechnik AG, UV System, Edition 23.10.2015... -
Page 10: Controller Menu Level 2 (Eps 1/2)
Description Master Slave error Sum error READY Lamp ready EPS is on ÜTE Temperature error Phase error Short/Ground error Lamp error Tab. 12: Status signals for the controller menu level 2 2015 © Durst Phototechnik AG, UV System, Edition 23.10.2015... -
Page 11: Controller Menu Level 3 (Lamp 1/2)
The following status signals can be displayed. Here 1 stands for active, 0 for not active. Abbreviation Description Thermo switch Shutter open Shutter closed Fan OK Magnet valve/shutter Fan relay Tab. 14: Status signals for the controller menu level 3 2015 © Durst Phototechnik AG, UV System, Edition 23.10.2015... -
Page 12: Controller Menu Level 4 (Subd 1/2)
Shutter opened Tab. 16: Meaning of the controller menu (signals UV bulb and shutter) Here 1 stands for active, 0 for not active. The values are forwarded to the printer software. 2015 © Durst Phototechnik AG, UV System, Edition 23.10.2015... -
Page 13: Displaying The Exhaust Air Temperature And Bulb Voltage
The last 60 fault messages are displayed in the error log. When new fault messages are received, the oldest messages are deleted if necessary. All fault messages are stamped with the number of the operating hours at the time of the message. 2015 © Durst Phototechnik AG, UV System, Edition 23.10.2015... -
Page 14: Displaying The Error Log
HMuC = MUC fault (Fehler! AutoText-Eintrag nicht definiert. Fehler! AutoText-Eintrag nicht definiert. 4, Fehler! AutoText-Eintrag nicht definiert. 16) The latest software update is active and the controller is ready to use. 2015 © Durst Phototechnik AG, UV System, Edition 23.10.2015... -
Page 15: Maintaining The Uv Unit
Rho 512R/312R 3 Maintaining the UV unit Maintaining the UV unit If there are Maintenance questions on the UV unit: à User Manual 312R/512R. 2015 © Durst Phototechnik AG, UV System, Edition 23.10.2015... -
Page 16: Diagnostics
Test pattern Full Pattern Heads Deactivate all print head modules High Resolution Options Bidirectional Check UV Lamps Num. of Advances Tab. 19: Measure the UV intensity settings 7. Press the Expose button. 2015 © Durst Phototechnik AG, UV System, Edition 23.10.2015... -
Page 17: Muc Error Codes
Check power supply (230 VAC) of EPS. Check the function of emergency relais Q2 on the main connection of the printer (à service manual Diagnostics). Check the function of the relais K1/K2 and the protective switches Q1/Q2. 2015 © Durst Phototechnik AG, UV System, Edition 23.10.2015... - Page 18 Check the controller inside temperature HMuC-TW Temperature warning Clean the ventilation slots of the controller. HMuC-TE Temperature error Check if the internal cooling fan of controller is working. Tab. 20: Error codes UV system 2015 © Durst Phototechnik AG, UV System, Edition 23.10.2015...
Need help?
Do you have a question about the Rho 512R and is the answer not in the manual?
Questions and answers