REAd All INSTRUCTIONS BEFORE USINg THIS AIR PURIFIER ANd SAvE THESE IMPORTANT INSTRUCTIONS 1. This Air Purifier is designed for use on a flat, level surface and may not work properly on an uneven surface. AlWAYS place this Air Purifier on a firm, level surface. AlWAYS place the Air Purifier at least six (6) inches away from walls and heat sources such as stoves, radiators, or heaters.
7. Turn the power ‘on’ by sliding the slide switch to the appropriate speed. You may also use the ionizer with this model. To turn the ionizer ‘on’ , press the rocker switch to the ‘l’ position. The green light will be illuminated when the ionizer is ‘on’ .
(Models 30054, 30055, 37055, 30070, 37065, 30075 and 30080 all use Replacement Filter 30920.) 1. Clean the outside of the unit with a soft, damp cloth. The front grill can be removed and cleaned in soapy water. Be sure that all parts are completely dry before you reassemble them to the Air Purifier.
The above is an illustration of how the HEPAtech™ air purification systems work. dust and other irritants are pulled into the air purification system and cleaned through the HEPAtech™ Filter. Clean, purified air is released into the room. Other Home Comfort Products from Hunter...
Air Purifier free of charge. Installation is deemed to occur at the date if purchase. If the Air Purifier cord, ionizer, or front grill fails any time within one (1) year after installation due to a defect in material or workmanship, we will replace or, at our option, repair the unit free of charge at our nearest service centre or at our Service department in Memphis, Tennessee.
0,1 micrones. El aire de la habitación entra a través de la rejilla del frente y se purifica al pasar a través del prefiltro de espuma del sistema HEPAtech™. El aire ya purificado sale entonces a través de la rejilla superior para evitar la agitación de las partículas que se...
Page 9
2. Coloque este purificador de aire sobre una superficie firme y nivelada. Antes de encender el purificador poniéndolo en ‘on’ , usted tiene que abrir la rejilla frontal y retirar el plastico protector que proteje el filtro HEPAtech™. Colocando los dedos atras de las aletas, hale la rejilla hacia usted.
(Los modelos 30054, 30055, 37055, 30070, 37065, 30075 y 30080 usan el filtro de repuesto 30920). 1. Limpie el exterior de la unidad con un paño suave y húmedo. La rejilla frontal se puede sacar y lavar en agua jabonosa. Asegúrese de que todas las piezas estén completamente secas antes de volver a instalarlos en la unidad.
Page 11
Exclusivous Unicamente) La anterior es una ilustración de la forma en que los sistemas de purificación de aire HEPAtech™ trabajan. El polvo y los otros irritantes son extraídos dentro del sistema de purificación de aire y limpiados a través del filtro HEPAtech™.
Page 12
Si cualquier parte del motor de su sistema de purificación de aire HEPAtech™ (“Purificador de aire”) falla durante los primeros cinco (5) años a partir de la instalación, debido a un defecto en el material o en la mano de obra, le suministraremos un purificador de aire de repuesto sin ningún costo para usted. Se considerará...