Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Gazelle G9636
Summary of Contents for Gazelle G9636
-
Page 2: Table Of Contents
Contents 1. Introduction ........................1 2. Labels ..........................1 3. Warranty ........................1 4. Description of the hydraulic crimping unit ............ 2 4.1 Description of the components ..................2 4.2 Description of the crimping procedure ..............2 5. Remarks with respect to the determined use ..........2 5.1 Operation of the unit ....................... -
Page 4: Introduction
3. Warranty Each GAZELLE Hydraulic tools is warranted to be free from defects in material and workmanship under normal use and service unless stated otherwise herein. The warranty period for the main unit is one year and begins on the date of purchase. -
Page 5: Description Of The Hydraulic Crimping Unit
4. Description of the hydraulic crimping unit 4.1 Description of the components Coupler 4.2 Description of the crimping procedure A crimping process is characterized by the closing motion of the dies. The cable lug or connector will be position in the stationary half of the crimping die. The piston will push the moving part of the die towards the compression point. -
Page 6: Explanation Of The Application Range
The crimping process will proceed as described in chapter4.2. After the crimping process has been completed and the piston has been retracted, remove the connecting material from the crimping head. 5.2 Explanation of the application range Table 2 Crimping range Connecting material （... -
Page 7: Mounting Instructions
Attention: Do not use on or near live circuits. Before starting to crimp please make sure that all parts involved in the crimping process are not connected to live circuits. The tool can be operated in a temperature range from -20℃ to +50℃ indoors and outdoors. -
Page 8: Service And Maintenance
Abbreviations: CL-tubular cable lugs, AEH-cable end-sleeves, QS-Cross-section If applications other than those mentioned in table 2&3 are intended to be performed with this tool it is necessary to contact the manufacturer. With those dies mentioned in Table 3a only connectors “Standard type” are supposed to be crimped. -
Page 9: Technical Data
=> Return the tool to the manufacturer. Do not open the tool. 7. Technical data Crimping force: 250kN Stroke: 20mm Rated pressure: 700bar Crimping capacity: Max Cu 630mm²/ Al 500 mm² Weight: 5.5kg Dimensions: 36*13*13cm Symbols Safety warnings Please do not disregard these instructions in order to avoid human injuries and environmental damages. - Page 10 We shall in no event be liable for death, injuries to persons or property from the improper use and lack of maintenance of our product. Any doubt of safety operation and precaution, please contact with our distributor. Please properly dispose of all packing materials and removed parts.
Need help?
Do you have a question about the G9636 and is the answer not in the manual?
Questions and answers