Advertisement
SMARTPULSE™ COMMUNICATION MANUAL
HRG1
HRG2
© 2024 Post Glover Resistors, Inc.
Low Voltage High Resistance
Communication Manual with
HOME
™
NGR
VOLTAGE
NGR
CURRENT
NGR
VOLTAGE
NGR
CURRENT
1369 Cox Avenue • Erlanger, KY 41018 • USA • Phone: 800-537-6144 / 859-283-0778 • www.postglover.com
SmartPulse
Grounding System
Modbus Memory Map
D1.0
05/17 08:18
0.0 V
0.0 A
0.0 V
0.0 A
PWR
CPU
COM
PGR Document #HR503-24
Advertisement
Table of Contents
Related Manuals for Post Glover SMARTPULSE
Summary of Contents for Post Glover SMARTPULSE
- Page 1 05/17 08:18 HRG1 VOLTAGE 0.0 V CURRENT 0.0 A HRG2 VOLTAGE 0.0 V CURRENT 0.0 A 1369 Cox Avenue • Erlanger, KY 41018 • USA • Phone: 800-537-6144 / 859-283-0778 • www.postglover.com © 2024 Post Glover Resistors, Inc. PGR Document #HR503-24...
- Page 2 03/1/2024 Updated Modbus Memory Map Tables 1369 Cox Avenue • Erlanger, KY 41018 • USA ™ Phone: 800-537-6144 / 859-283-0778 • Fax: 859-283-2978 www.postglover.com Serving the Electrical Industry Since 1892 © 2024 Post Glover Resistors, Inc. • PGR Document #HR503-24...
- Page 3 3.0 Modbus Memory Map ............................ 7 1369 Cox Avenue • Erlanger, KY 41018 • USA ™ Phone: 800-537-6144 / 859-283-0778 • Fax: 859-283-2978 www.postglover.com Serving the Electrical Industry Since 1892 © 2024 Post Glover Resistors, Inc. • PGR Document #HR503-24...
-
Page 4: Communications Ports
2.0 Communications Ports This section presents information on the communication ports available on the SmartPulse HRG. Changes to the HRG’s communications ports should only be made by qualified technicians. The HRG is provided with serial RS- 485 port by default and has an option for an Ethernet port. - Page 5 Note: Connection through the HMI Ethernet Ports Ethernet0 and Ethernet1 are 1369 Cox Avenue • Erlanger, KY 41018 • USA ™ Phone: 800-537-6144 / 859-283-0778 • Fax: 859-283-2978 www.postglover.com Serving the Electrical Industry Since 1892 © 2024 Post Glover Resistors, Inc. • PGR Document #HR503-24...
-
Page 6: Communication Port Settings
After 30 seconds the HMI & Smart Relay should reconnect and the System Reset button on the home screen will need to be pushed. 1369 Cox Avenue • Erlanger, KY 41018 • USA ™ Phone: 800-537-6144 / 859-283-0778 • Fax: 859-283-2978 www.postglover.com Serving the Electrical Industry Since 1892 © 2024 Post Glover Resistors, Inc. • PGR Document #HR503-24... -
Page 7: Modbus Memory Map
Modbus address. Based upon this information, it is the customer’s responsibility to properly configure the message request to the controller. Since the SmartPulse HRG can be configured as a dual unit, HMI and Modbus addresses are provided for both units. - Page 8 Note: DWORD Variables (32-bit) are listed with least significant register first. 1369 Cox Avenue • Erlanger, KY 41018 • USA ™ Phone: 800-537-6144 / 859-283-0778 • Fax: 859-283-2978 www.postglover.com Serving the Electrical Industry Since 1892 © 2024 Post Glover Resistors, Inc. • PGR Document #HR503-24...
Need help?
Do you have a question about the SMARTPULSE and is the answer not in the manual?
Questions and answers