Ekasand E00015S-1DB Manual

EKASAND Low Profile
127 mm (5 in.) and
152 mm (6 in.) 12,000 RPM
Random Orbital Sander
127 mm (5 in.) and 152 mm (6 in.) 12,000 RPM Random Orbital Sander (See "Product Configuration/Specifications" Table for par-
ticular Model) to which this declaration relates is in conformity with the following standard(s) or other normative document(s) EN ISO
15744:2002. Following the provisions of 89/392/EEC as amended by 91/368/EEC & 93/44/EEC 93/68/EEC Directives and consolidating
Place and date of issue
Manufacturer/Supplier
UNEEDA Enterprizes, Inc
640 Chestnut Ridge Rd.
Spring Valley, NY 10977 USA
Tel: (845) -426-2800
Fax: (845)-426-2810
Recommended Airline
Size - Minimum
10 mm
WARNING
Always wear safety goggles
to protect your eyes.
OIL DAILY
Oil daily for superior
performance.
1) General Industry Safety & Health Regulations, Part 1910,
OSHA 2206, available from: Superintendent of Documents;
Government Printing Office; Washington DC 20402
2) Safety Code for Portable Air Tools, ANSI B186.1 available
from: American National Standards Institute, Inc.; 1430 Broad-
way; New York, NY 10018
3) State and Local Regulations.
Key parts of the above regulations are excerpted below. They
are not intended to be inclusive. Study and comply with all regu-
lations.
1) TOOL INTENT – Tool shall be used only for purposes intended
in its design.
DOC 1119
640 Chestnut Ridge Rd.; Spring Valley, NY 10977 USA
declare on our sole responsibility that the products
Required Personal Safety Equipment
Safety Glasses
Safety Gloves
Recommended Maximum
Hose Length
3/8 in
8 meters
Operators Instructions
Includes – Please Read and Comply, Assembly Drawing of Ma-
chines, Parts List, Proper Use of Tool, Work Stations, Putting the
Tool Into Service, Operating Instructions, EKASAND Service Tools
and Accessories, EKASAND Back-Up Pads™, EKASAND War-
ranty, EKASAND Service Kit.
Important
Read these instructions carefully before installing, operating,
servicing or repairing this tool. Keep these instructions in a safe,
accessible location.
Please Read and Comply With
Declaration of conformity
UNEEDA Enterprizes, Inc.
Directive 98/37/EC
Name
Important
Read these instructions carefully before
installing, operating, servicing or repair-
ing this tool. Keep these instructions in a
safe accessible location.
25 feet
2) AIR SUPPLY – Test and operate tools at 90 PSIG (6.1 Bar)
maximum unless tool is marked otherwise. Use recommend-
ed airline filters - regulators – lubricators (FRL).
3) UNUSUAL SOUND or VIBRATION – If tool vibrates or pro-
duces an unusual sound, repair immediately for correction.
4) OPERATOR PROTECTIVE EQUIPMENT – Wear goggles or
face shield whenever tool is in operation. Other protective
clothing shall be worn, if necessary.
5) SAFETY MAINTENANCE PROGRAM – Employ a safety pro-
gram to provide inspection and maintenance of all phases of
tool operation and air supply equipment in accordance with
"Safety Code for Portable Air Tools."
1
EKASAND TOOLS
© EKASAND•0701
Signature or equivalent marking of authorized person
Breathing Masks
Ear Protection
Air Pressure
Maximum Working Pressure
Recommended Minimum
6.2 bar 90 psig
NA NA
01/20/09