PARTS & ASSEMBLY
PARTS
EXHAUST
HOSES
Hose Adapter
Exhaust
Hose
- Window
Kit
Adaptor
Wl N DOW KIT
ASSEMBLY
& INSTALLATION
INSTALLATION
When the unit is operating
as an air conditioner
or dehumidifier,
the unit draws in flesh outdoor air and exhausts hot air
out of the room to complete
the air exchange.
When the unit is operating
in tan or heater modes, no outdoor air exchange
takes place. The window kit and exhaust hose do not need to be installed
when the unit is used as a fan or heater.
NOTE:
The supplied
window
kit can be installed
in sliding windows
and sliding glass doors up to 8 ft. long
(approximate
length).
MOUNTING
THE EXHAUST
HOSES
*
Choose a suitable location, near a grounded
electrical
outlet and suitable window or door. Remove
packaging
and locate components.
.
Extend both ends of the exhaust hoses approximately
6 inches.
.
Screw the window kit adapter onto one end of the exhaust hose clockwise.
Screw the hose adapter onto
the other end of the exhaust
hose clockwise.
Repeat on the other exhaust hose.
.
Remove
outlet covers flom the back of the unit by screwing
them counter-cloclcwise,
then lifting up.
.
Mount the exhaust hoses onto the back of the unit by locking the hose adapters into place.