Page 2
Page 14 GENESIS BRANDED VEHICLE OWNER PRIVACY POLICY Your Genesis Branded Vehicle may be equipped with technologies and services that use information collected, generated, recorded or stored by the vehicle. Genesis Branded Vehicle has created a Vehicle Owner Privacy Policy to explain how these technologies and services collect, use, and share this information.
Use this Quick Reference Guide to learn Smart Cruise Control [SCC] about the features that will enhance your Tire PressureMonitoring System (TPMS) enjoyment of your Genesis Branded Vehicle. More detailed information about these features are available in your * Some vehicles may not be equipped Owner’s Manual.
4 QUICK REFERENCE HOW-TO LINKS SCAN TO LEARN Scan to learn more about new and existing features on your Genesis with “How-To” guides: WATCH & LEARN READ & LEARN GENESIS GENESIS HOW-TO TOUCHSCREEN VIDEOS GENESIS GENESIS DYNAMIC NAVIGATION VOICE OVERVIEW...
4. To turn off the remote start function, press the Remote Start button once. Accessing mechanical key 1. Place a soft cloth over the groove ,and pry open the smart key cover. 2. Press the mechanical key and remove it from the smart key FOB. GENESIS GV80...
4 FEATURES AND CONTROLS DOOR LOCK Operating Door Locks from Outside the Vehicle Mechanical Key After pulling the door handle , turn the key toward the front of the vehicle to lock or turn the key toward the rear of the vehicle to unlock If you lock the driver’s door with a mechanical key while the engine is running, turn the key TWICE toward the front of the vehicle to lock...
Press lock button while pressing down on headrest. To adjust headrest forward (front seats only): Pull forward to 1 of 3 positions To adjust headrest rearward (front seats only): Pull it fully forward to the farthest position and release it. GENESIS GV80...
Drive Mode and driving at high speed. You can activate or deactivate Posture Assist function from the Settings menu in the infotainment system screen by selecting the following: Setup > Vehicle > Seat > Smart Support GENESIS GV80...
4 FEATURES AND CONTROLS DRIVER POSITION MEMORY SYSTEM To Store Settings 1. Shift to P (Park) while the Engine Start/Stop button is in the ON position. 2. Adjust the driver’s seat position, outer side view mirror position, steering wheel position, instrument panel illumination intensity and NOTE: To reset the system, please head-up display height/brightness...
NOTE: Liftgate opening height adjustment is available in the vehicle Setup > Vehicle > Door / Liftgate > Power Liftgate infotainment under Opening Height. Power Liftgate open/close button on the smart key Press and hold. GENESIS GV80...
4 FEATURES AND CONTROLS Power Liftgate close button Press to close. Power Liftgate lock button Press to lock the liftgate and doors will lock as well. Smart key needs to be within range. SMART LIFTGATE On a vehicle equipped with a smart key, the trunk can be opened with hands-free activation using the smart trunk system.
After parking and getting out of vehicle with Engine ON or Ignition ON, if all doors are locked by accident with rear door lock switch, which has all door lock function, Genesis cannot be unlocked with fob or O/S handle touch senor.
4 FEATURES AND CONTROLS FUEL FILLER DOOR Opening the fuel filler door: 1. Turn the engine off. 2. Ensure the driver’s door is unlocked. 3. Push the fuel filler door near the rear of the vehicle. 4. Pull the fuel filler door outward to access the fuel tank cap.
4 FEATURES AND CONTROLS INSTRUMENT CLUSTER Type A with 8" LCD Display Type B with 12.3” LCD Display with 3D feature Tachometer Speedometer Engine coolant temperature gauge Fuel gauge Warning and indicator lights LCD display GENESIS GV80...
4 FEATURES AND CONTROLS USB PORTS Front Plug in a USB cable or other media device to connect an external audio device and listen to it through the audio system in your vehicle. The rear USB charger is designed Rear to recharge batteries of small size electrical devices using a USB AC 115V...
Head-up display can be enabled from the Settings menu in the infotainment system screen. Select: Setup > Vehicle > Head-Up Display > Enable Head-Up Display NOTE: If you wear polarizing filter sunglasses, it’s difficult to read the Head-Up Display information. GENESIS GV80...
Automatic Heating / Air Conditioning If cabin humidity increase while Climate Control is off, fresh air will be circulated into the cabin. Please refer to the Owner's Manual for further details. Automatically controls the modes, speeds, intake air- conditioning functions. GENESIS GV80...
Page 20
4 FEATURES AND CONTROLS Defogging Defrosting 1. Press the front 1. Press the front defrost defrost button button 2. Select the desired 2. Set temperature to temperature warmest setting (HI) 3. Fresh mode will 3. Press the defroster button be selected 4.
Calls <Name> saved in contacts. Ex) call John Find <POI or Address> Find POI name or address for destination Dial <Number> Dials <123 456 7890> How is the weather Check on the weather NOTE: For optimal performance, ensure vehicle has an active GCS subscription. GENESIS GV80...
1-844-340-9741. Genesis Intelligent Assistant App Genesis Connected Services is a dynamic, connected car technology that allows Genesis vehicles to send and receive important and useful information. You can download the Genesis Intelligent Assistant App to your compatible smartphone from the following sites: ®...
Page 23
To use this feature, you must have a Genesis Connected Services Personal Identification Number (PIN). To create or change your PIN, log on to owners.genesis.com.
Page 24
4 INFOTAINMENT Remote Start with Climate Control will terminate: • After 10 minutes or after selected engine timer runs out • Brake is pressed without proximity key inside vehicle • Alarm is triggered without proximity key inside vehicle • Door/trunk is opened from inside the vehicle Remember: remote Start with Climate Control will automatically shut off after 10 minutes or after selected engine timer runs out.
Apple CarPlay supported apps. NOTE: Apple CarPlay compatibility requirements: OEM cable, latest IOS software, iPhone 5 or later, data, and wireless plan for applicable feature(s). It is recommended to always update your phone to the latest operating system release. GENESIS GV80...
4 INFOTAINMENT NAVIGATION Map position Move to the Home Screen Estimated arrival time and remaining distance Map view mode Current location and destination name display The map view can be switch between Head Up and North Up. Vehicle position mark Map Scale Display Route display Navigation Volume...
2. Then AVN (Head unit) will save the last volume levels of each source in the system sound settings. 3. If users change the source, the volume will revert to the previously set volume for that source. MODE GENESIS GV80...
4 INFOTAINMENT HOMELINK WIRELESS GARAGE CONTROL SYSTEM Press and release button , or • If the indicator illuminates and is orange, go to Step 3 (programming mode). • If the indicator illuminates and shows a solid or flashing green light, go to Step 2 (erasing mode). Erasing Mode Press and hold the button you wish to program for approximately 15-25 seconds, until the LED flashes orange several times.
Page 29
Return to the vehicle and firmly press the HomeLink button, hold for two seconds and release the button up to three times. Do not press the HomeLink button rapidly. At this point programming is complete and your device should operate. HOMELINK GENESIS GV80...
4 DRIVING REMOTE SMART PARKING ASSIST (RSPA) (if equipped) Remote Smart Parking Assist uses vehicle sensors to help the driver park and exit parking spaces remotely from outside the vehicle by controlling the steering wheel, vehicle speed and gearshifts. Front ultrasonic sensors Rear corner ultrasonic sensors Rear ultrasonic sensors Front corner ultrasonic sensors...
Page 31
Parking and moves while the icon is pushed. Assist icon • When using Remote Smart Parking function, regardless of which direction the icon is pushed, parking is supported while the icon is pushed. GENESIS GV80...
4 DRIVING AUTO HOLD The Auto Hold feature assists in steep hill areas. It holds the brake until the accelerator pedal is pressed. 1. Press the AUTO HOLD WHITE switch. 2. Stop the vehicle by pressing GREEN the brake pedal. The brakes will remain engaged even if the brake pedal is released.
Assistance systems may change. With the Engine Start/Stop button in the ON position, from the Settings Setup > Vehicle > Driver Assitance > Sound Icon menu select: to change the Warning Volume to HIGH, MEDIUM, LOW, or OFF. GENESIS GV80...
4 DRIVING DRIVER ATTENTION WARNING (DAW) Driver Attention Warning provides a warning when the driver is not looking forward. It can help determine the driver's attention level by analyzing driving pattern and driving time while vehicle is being driven. Driver Attention Warning will recommend a break when the driver's...
NOTE: If necessary, emergency braking is possible by pulling and holding the EPB switch. NOTE: Please see the owner’s manual for additional details. GENESIS GV80...
4 DRIVING SMART CRUISE CONTROL (SCC) Smart Cruise Control helps maintain distance from the vehicle ahead and drive at a speed, set by the driver. To turn on SCC: 1. Press the Driving Assist button to turn on SCC. The speed will be set to the current speed on the cluster.
NOTE: The engine will not shut off if the prerequisites are not satisfied. In that case, the Auto Stop indicator will illuminate in yellow on the instrument cluster. To deactivate Press the ISG OFF button, indicator illuminates ON. To activate Press the ISG OFF button, indicator turns OFF. GENESIS GV80...
Page 38
4 DRIVING HIGHWAY DRIVING ASSIST (HDA) Highway Driving Assist helps maintain a set distance and speed from the vehicle ahead when driving on a highway and helps center the vehicle in the lane while driving, even through a curve. With the Engine Start/Stop button in the ON position, from the setting menu to select or deselect: Setup >...
Distance Warning will not If PDW is OFF, PDW will turn ON operate if the Parking Safety automatically when in Reverse. button is OFF. PDW will not warn when vehicle is driven forward at speed above 6 mph. GENESIS GV80...
TPMS. Inspect all tires and adjust tire pressure to specification. If the lamp remains illuminated, have the system checked by an authorized retailer of Genesis Brand Products as soon as possible. To access the TPMS...
Page 41
After-hours pickup and delivery are at the discretion of your participating retailer. • You must notify your Genesis Service Experience Manager 1 business day in advance if location or time of valet services changes. If a change or cancellation is not made at least 1 business day in advance, you may be charged a fee, or Service Valet may be cancelled.
Page 42
Failure to have your vehicle serviced at the specified interval may invalidate the warranty under certain circumstances. If for any reason a service is missed, the authorized Genesis retailer will perform the next or missed major service.
Page 43
Transfer of Coverage The described coverage only applies to the original retail purchaser or original lessee of a Genesis Brand vehicle. The coverage is not transferable to subsequent owners, with the exception of immediate family members. Immediate family members include the following: •...
Page 44
If there are some important safety matters like fuel flow restriction, surging, loss of power, hard starting problem, etc. replace the fuel filter immediately regardless of maintenance schedule and consult an authorized retailer of Genesis Branded products for details.
Need help?
Do you have a question about the GV80 2024 and is the answer not in the manual?
Questions and answers