Haier HSU-12LX03 Operation Manual page 8

Operation
Auto run, Fan operation
(1) Unit start
Press ON/OFF button, unit starts.
Previous operation status appears on display.
(Not Timer setting)
Power indicator on indoor unit lights up.
(2) Select operation mode
Press MODE button. For each press, operation
mode changes as follows:
AUTO COOL
Unit will run in selected mode.
Stop display at "
(3) FAN
Press FAN button. For each press, fan speed changes
as follows:
AUTO
Unit will run at selected fan speed.
Note:AUTO is not available in FAN mode.
Hints
Remote controller can memorize settings in each operation mode. To run it next time just
select the operation mode and it will start with the previous setting.
No reelecting is needed.(TIMER ON/OFF needs reelecting)
Cautions:
After replacing batteries, press ON/OFF, and display
becomes as follows:
Operation mode: AUTO, Temp. No
Timer mode: No, Fan speed :AUTO
DRY FAN
" AUTO or " "FAN.
LO MED
Enjoy yourself by just a gentle press.
HI
6
ON/OFF TEMP
1
4
MODE
2
FAN
3
SWING
SLEEP
LOCK
(4) Unit stop
Press ON/OFF button.
Only time remains on LCD.
All indicators on indoor unit go out.
Vertical flap closed automatically.
Note:
The above information is the
explanation of the displayed
information therefore varies
with those displayed in actual
operation.
SET
TIMER
CLOCK
RESET