GE APE08AK - Portable Room Air Conditioner Owner's Manual And Installation Instructions page 12

Installation instructions
Instructions for installing the window slider in a sliding window. If you have a double-hung window,
see instructions on pages 10 and 11.
[]
[]
INSTALL WINDOW SLIDER
IN WINDOW
If the window slider is shorter than the
height of the window, pull the sliding arm
out to the height of the window.
If the window slider is longer than the
height of the window, cut the slider arm
to the height of the window.
If the two-piece window slider is too short
for the height of the window, attach and
use the third piece of the slider.
Inside
Third piece of slider
for extra long windows
[] Cut the window seal (adhesive-backed) to
the window height and stick the adhesive
side to the inner window sliding face, as
shown above.
[] Attach the top of the slider to the window
face using a large wood screw through one
of its holes.
Large wood screw
Inside
[] Slide the window against the edge of the
window slider.
[] If applicable, hook the two window slider
brackets over the side edge of the window
slider and attach to the inner window
sliding face using two large wood screws.
[] INSTALL WINDOW
LOCKING BRACKET
Attach the window locking bracket with
one large wood screw.
Window locking bracket
12