Summary of Contents for NOA & NANI Leines 2+3 Chest of Drawers
Page 1
ASSEMBLY INSTRUCTIONS structions>> <<Before assembling, read all the instructions>> Leines 2+3 Chest of Drawers ID23942...
Page 2
Tools Required CAUTION: Do can damage y Please check you have a If y ou are missing an y ha Please ensure you have t Please retain your receip Do not tighten screws bef Do not use this p roduct u Check that all bolts , screw Part Part...
Page 3
Tools Required CAUTION: Do not use tools other than those required, as this can damage your new item ot use tools other than those required , as this NOTE r new item • Please check you have all hardware before assembling. •...
Page 14
Details of Installing the Drawer Steps for disassembly runner:move out the inside part to the end, press the plastic upward and pull out until the runner to separate. Ensure that the runners on the cabinet are all the way to the front.
Page 15
Hold the drawer horizontally and ensure the slide tracks are aligned to the runners. Push the drawer gently inwards until you hear a soft click. WARNING: Any uneven force used, or any component is out of place upon installation of the drawer, will result in the damage of the rails. In case of incorrect installation, gently press the plastic buttons (one side push up the other side push down) to detach the slide track and pull out the drawer.
Page 16
IMPORTANT - READ CAREFULLY - RETAIN FOR FUTURE REFERENCE Safety Information All assembly fixings should be tightened properly and care should be taken that no fittings are loose. Regular tightening of the bolts is recommended to extend the lifespan of the product. Please follow all the instructions when assembling the product and do not use power tools when building.
Need help?
Do you have a question about the Leines 2+3 Chest of Drawers and is the answer not in the manual?
Questions and answers