Page 1
JZ20036 1980mm 1100mm 745mm 2125mm MORO CABIN BED WITH SLIDE...
Page 2
WARNING! To avoid damage to the product please do not use powertools to assemble this item!!!
Page 3
Tools Required CAUTION: Do not use tools other than those required, as this can damage your new item NOTE • Please check you have all hardware before assembling. • If you are missing any hardware, please contact the store of purchase. •...
Page 12
Ø8mm IMPORTANT-READ CAREFULLY-RETAIN FOR FUTURE REFERENCE a) All assemby fastenings should be tightened properly and that care should be taken that no fittings are loose. b) Maximum thickness of mattress:13.5cm, the max mattress thickness must not be over the maximum mattress thickness marking marked on the upper bed. c) Recommended size of the mattress:L190*W90*H13.5cm.
Page 13
IMPORTANT - READ CAREFULLY - RETAIN FOR FUTURE REFERENCE Safety Information All assembly fixings should be tightened properly and care should be taken that no fittings are loose. Regular tightening of the bolts is recommended to extend the lifespan of the product. Please follow all the instructions when assembling the product and do not use power tools when building.