Related Manuals for Hinen BATTERY COMBINER BOX
Summary of Contents for Hinen BATTERY COMBINER BOX
- Page 1 BATTERY COMBINER BOX Quick Installation Guide Dongguan Hinen New Energy Technology Co., Ltd Add: No.�� Dongkang Road, Dalingshan Town, Dongguan City, Guangdong Province, China Tel: +�� (���) ���� ���� Email: market@hinen.com Website: https://www.hinen.com...
- Page 2 �. Installation Precautions �. Dimensional parameters Please make sure the installation location meets the following conditions： ���mm ���mm ● The installation and use environment need to comply with local laws and regulations, as well as relevant international standards. ● Install in a dry, well-ventilated environment and secure the equipment on a sturdy, level support surface. ●...
- Page 3 �. Combiner box installation �. Protective ground wire connection �.� N·m Danger It is strictly prohibited to connect the N wire to the chassis as a ● Before connecting cables, ensure that the combiner protective earth wire, as this may result in an electric shock box, inverter, and battery are fully switched off.
-
Page 4: Installation Preparation
�. Connect the power line terminal �. Power cord connection Installation Preparation： � N·m �.Make sure both battery and inverter are turned off. * There are positive and negative polarity marks on the bottom and �. Make sure all breaker switches are turned off. top of the combiner box. - Page 5 Schematic diagram of multiple inverters connected in parallel Multiple battery packs are stacked and paralleled to form clusters, and then paralleled with other clusters through the convergence box (maximum support for � clusters at the same time). The output is then converged to the inverter. �...
- Page 6 �. Precautions for use ● The copper rows cannot be oxidized, and there must be no stains, ink, or scratches on the surface. ● The copper rows should be tightly secured in the chassis, well insulated and not loose. ● The copper rows to distinguish between positive and negative polarity, the red power line connected to the copper row marked with a ‘+’...
Need help?
Do you have a question about the BATTERY COMBINER BOX and is the answer not in the manual?
Questions and answers