Backfire R5 Manual

CHARGING
Charging Port: USB-C. You can use a phone charger to charge the remote control, but
only with a USB-A to USB-C data cable. USB-C to USB-C data cables are not compati-
ble.
After connecting the remote control to the charger, the remote control will vibrate to
indicate charging and the screen will display the charging progress as a progress bar.
Note: While the remote control is charging, you cannot perform other operations.
FAULT DESCRIPTION
Overvoltage Alarm
When the battery is fully charged or when going downhill, if the voltage of the
skateboard battery exceeds the normal value, it will trigger an overvoltage alarm.
Note: It is strictly prohibited to use the skateboard to go downhill when the
battery is fully charged.
Signal Loss Alarm
When the skateboard loses power or the signal is suddenly lost, the remote control
screen will display "DISCONNECT".
Stall Alarm
When the motor of the skateboard is stuck or completely blocked, the remote control
will continuously vibrate with short intervals and display the message "MOTOR
STALLING" on the screen.
Overheating warning
When the temperature of the skateboard controller is too high, the remote control will
vibrate once, and the screen of the remote control will display "OVER TEMPERATURE",
and the output power will be reduced proactively.
TRIP：
ODO:
Facebook
CONTACT US
TIKTOK: @backfireboardsusa
Official Website: https://www.backfireboards.com/
Backfire APP
iPhone users please search for 'Backfire' on the App Store.
Android user download: https://www.backfireboards.com/latest-app
1.5
12.5
Instagram YouTube User Guide
Remote control manual
(R5)