Pandora PIR-100BT Manual

• Install a new battery in the battery compartment observing the polarity.
• When installing a new battery, the sensor status LED will produce three red flashes. The low
charge level will be displayed with a single flash.
• Connect the sensor to the mounting bracket by turning counterclockwise (see figure -
«close»).
SOFTWARE UPDATE
• Open the Pandora Specialist mobile application (Android /iOS), open the «Advanced
installation» or «Quick installation» menu.
• Press and hold the sensor button until the tenth flash of the status LED (10 seconds).
• Choose sensor in the app and select one of the update options («Download firmware» -
download current software from the server, «File Manager» - use previously downloaded
software).
• Start the update.
-4-
PIR-100BT
INFRARED MOTION SENSOR
Wireless peripheral device designed to work
with Pandora security systems.
The sensor recognizes the thermal movement in
the internal space of the protected area.
PACKAGE CONTENTS
Sensor 1.
Manual 1.
SPECIFICATIONS
Radio interface: 2.4-2.5 GHz (BT 5.0)
Motion Sensor: Passive infrared
- detection angle: 120°
- operation distance: 6 m
Removal sensor: magnetic field sensor (Hall)
Battery: CR123A, 3 V
Average battery life: 12 months
Operating range*: from -10°C to +40°C
Degree of protection*: IP40
Dimensions: Ø55x21 mm
Weight: 18 g
Compatibility: Pandora security systems with BT 5.0 interface with software version v4.24
and higher
* W .
ithout battery
t
he manufacturer reserves the right to change the product configuration and design in
order to improve its technical and operational parameters Without notifying the consumer
.