Pandora DMS-101BT Quick Start Manual

INSTALLING/REPLACING THE BATTERY
For a proper sensor operation, two 3V CR2450 batteries are used.
Batteries must be replaced when receiving an SMS notification «Replace battery in DMS»
(telemetry system function) or if the sensor is not connected to the system.
• Press to one of the latches and take of the battery cover.
• Connect two new batteries parallel, «plus» to «plus».
• Install batteries in the sensor.
• When installing new batteries, the sensor light indicator will produce three flashes. The low
charge level will be displayed with a single flash.
• Close the battery cover.
SOFTWARE UPDATE
You can update sensor software using the Pandora Specialist app (Android). Sensor must be
paired with the system.
• Open the Pandora Specialist app and connect to the system.
• Go to System devices -> DMS 1 / 2 / 3 / 4 -> Update.
• Choose one of the update options:
«Download firmware» - download current software from the server;
«File Manager» - use previously downloaded software.
• Start the update.
-4-
DMS-101BT
WIRELESS DOOR SENSOR
Wireless peripheral device designed to work with
Pandora security systems.
The sensor is designed to control opening elements
of the vehicle. It detects shock and movement,
temperature, controls open/close state.
PACKAGE CONTENTS
Sensor 1
Magnet 1
Fasten kit 1
Manual 1
SPECIFICATIONS
Radio interface: 2.4-2.5 GHz (BT 5.0)
Door state sensor: magnetic field sensor (Hall)
Shock/motion sensor: digital accelerometer
Temperature sensor: digital
Battery: CR2450 (2 pcs.)
Average battery life: 18 months
Operating range*: from -25°C to +60°C
Degree of protection*: IP40
Dimensions: 36x32x14 mm - sensor; 35x8x9 - magnet
Weight*: 7 g - sensor; 3 g - magnet
Compatibility: Pandora security systems with BT 5.0 interface with
software version v4.25 and higher
* .
without batteries
t
he manufacturer reserves the right to change the product configuration and design in
order to improve its technical and operational parameters without notifying the consumer
.