PARTS & DESCRIPTION LIST OF COMPONENTS Blade Guide Comb ON/OFF Switch USB Cable Cleaning Brush USB Port Blade Comb ON/OFF Switch Cleaning Brush Indicator Light USB Port...
Page 3
WARNINGS ATTENTION : Read this booklet carefully as it contains important instructions for a safe installation, use and maintenance. Important instructions to be kept for future reference. The following basic precautions should always be followed when using electrical appliances: Read all instructions before using the appliance. This appliance must be used only for the purpose it was expressly designed;...
Page 4
If you are using the appliance for the first time, you should: Fully charge the appliance for 16 hours. Subsequently, the charging process should last for 8 hours. Charge, use and store the dry appliance between 15°C (59°F) and 35°C (95°F). DO NOT charge or store the appliance in the bathroom or near water sources, nor use the appliance whilst it is being charged.
Always remember to unplug the USB cable of the appliance after charging, before storing, using, cleaning or performing any maintenance operation. Avoid carrying out operations which are NOT specified in this manual (such as disassembling and/or altering). In case of malfunction or anomaly during the functioning, switch off the appliance immediately and check the cause of the anomaly, if possible, with the support of a qualified person.
Page 6
DO NOT use a power cable that is worn or frayed, or if the B connector of the USB power cable (downstream end) does not fit snugly into the port on the appliance. DO NOT pull, twist or bend the USB power cable, nor place heavy objects on it. The appliance can be used for up to 45 minutes after being fully charged.
HOW TO CLEAN AND MAINTAIN Cleaning the appliance Press the ON/OFF Switch to turn OFF the appliance. Remove the power cable from the appliance (if attached). DO NOT clean the appliance while it is being charged. Remove the Guide Comb from the appliance by lifting it out of the appliance (see pictures under the heading “To Remove and Attach the Guide Comb”).
Page 8
6 mm Guide Comb 3 mm To remove the Guide Comb, To attach the Guide Comb, place it onto lift it out of the appliance in the appliance as press down of the the direction shown appliance in the direction shown until a ‘click”...
Page 9
How to Cut Begin with the Guide Comb of the longest length if you are inexperienced in using the appliance. To cut hair in the region: Nape of the Neck Set the Comb length between 3 – 6 mm. Hold the appliance with the Blade teeth pointing upwards.
ENVIRONMENTAL TIP This device, along with all other electronic devices, should, when it is no longer capable of functioning, be disposed with the least possible environmental damage according to the local regulations in your area. In most cases you can discard the device at your local recycling center.
Need help?
Do you have a question about the PP2028 and is the answer not in the manual?
Questions and answers