Page 1
User Manual WooDrive E Automated wooden sliding door system Manufacturer: Melu d.o.o. Type: E (electric) Project number: 018663712 YEAR OF MANUFACTURE: 2023...
Page 2
USER MANUAL ver.01 PROJECT NO.: 018663712 Page 2 of 24...
1.2 Address of the manufacturer and customer support services ..............5 Product identification ............................5 Declaration of conformity ..........................6 Presentation of the WooDrive system ......................7 4.1 WooDrive E............................. 7 Intended use ........................... 7 WooDrive drive assembly ........................ 8 Package content ............................... 8 Explanation of symbols .............................
Page 4
14.3.3.5 Calibration of the motor – Encoder Calibration ................. 16 14.3.3.6 System status report - SendReport .................... 17 14.3.3.7 Setting the language ........................17 14.4 Updating the system and app ....................... 17 Updating the WooDrive firmware (FW update) ................17 Updating the mobile app .......................
1 Imprint Copyright All copyright for this manual and its appendices are owned by the company MELU d.o.o. The documentation is submitted to the recipient for his or her personal use only. Any forwarding, reproduction (electronic or mechanical), translations into other languages or other types of reproduction, partial or in whole, shall only be allowed with written permission of the company MELU d.o.o.
WooDrive E Type (model): Serial number: WD-2023110001 to WD-2033129999 Manufacturer: MELU d.o.o., Raduha 56, 3334 Luče, Slovenia Name and address of the person, authorised to draw up Blaž Selišnik, Raduha 56, 3334 Luče, Slovenia technical documentation: With this declaration, we affirm that the mentioned device complies with the provisions of the following...
WooDrive E The WooDrive E automated wooden sliding door system is a universal system, appropriate for interior doors, wooden as well as made of other materials. The system does not need a mains power supply or any other additional installations, as it contains batteries within the drive system.
WooDrive drive assembly The WooDrive drive assembly is the main part of the WooDrive E product, which contains all the elements for power supply, charging, communicating, control and operation of the drive. The drive assembly comes with a servomotor, the primary purpose of which is to move and operate the sliding door or, in more general terms, to move, lift or spin various objects between two final positions.
• Before installation, please read the enclosed installation manual carefully. Read all the steps for the installation and follow them carefully. Read the user manual before use. Save the manual, as well as the receipt and the warranty certificate! In case of a warranty claim, you will need to state the product number, invoice number and date of purchase.
After installing on the sliding door, the installer must fulfil the requirements as per Directive 2006/42/EC. • For installation, please observe the enclosed WooDrive E installation manual! In addition to this, the information in the user manual and safety information in the enclosed...
12 First start-up of the system 12.1 WooDrive App Before you begin using the system, download the WooDrive by Melu app on your mobile phone. Scan the relevant QR code to get the app. Figure 4: Apple store.
System is activated. Start the mobile app and connect with the WooDrive system. Figure 7: First connection with the WooDrive system. 13 Adjustment of the system – Motion Calibration Upon first start-up, the system must be adjusted to its surroundings. This determines the length of movement, the direction of opening (left/right), adjustment of the system to the weight of the load that is driven, etc.
Via motion sensors (O) (on the front and back side of the drive assembly). Via a touch button - TouchPanel (K). Via the WooDrive by Melu mobile app. 14.1 Motion sensors (O) Motion sensors are situated on the front and back side (see Figure 2, O). Motion sensors characteristics: ...
In case of an obstacle during movement, the movement stops automatically. After 3 seconds, the door automatically returns to the initial position. However, movement can be activated by pressing the Panel. In case of manual operation, activate movement by pressing the button or the drive will automatically go to the open position after 5 seconds.
Modes of operation 14.3.2.1 WooDrive (OpenSpan, SilentTime) WooDrive mode is a general mode where all the parameters can be set and the system can be operated in one place. Figure 11: WooDrive mode. In this mode, the door panel is opened and closed using the Open/Close button. ...
14.3.3.2 PIN code and changing the PIN code Before the first start-up, the system does not require the entry of a PIN code, as the latter is set by default. The factory-set PIN code is 1234. You are recommended to change the 4-digit PIN, otherwise anyone in your vicinity can access your drive.
14.3.3.6 System status report - SendReport System status report - SendReport is intended for providing Service Support with insight into the system status and easier assistance in case of potential defects. The report is sent to the e-mail address service@woodrive.eu. 14.3.3.7 Setting the language The app allows you to set the language to English or German.
16 General description of operation and errors Once the system is activated and motion calibration has been carried out successfully, the system is ready for operation. The system opens and closes automatically when the motion sensors are turned on. ...
18 Disposal of the product 18.1 General The product does not belong among municipal waste. At the end of its useful life, dispose of the product in accordance with the applicable legal regulations. Dispose of it at an appropriate waste collection facility. ...
Page 20
USER MANUAL ver.01 PROJECT NO.: 018663712 Page 20 of 24...
Electronic components – 22000 cycles or 24 months WooDrive is a product by the company Melu d.o.o., which guarantees for the quality and flawless functioning of the mechanism for the warranty period, which starts on the date of purchase. The warranty is valid only if the product is installed properly.
Page 22
USER MANUAL ver.01 PROJECT NO.: 018663712 Page 22 of 24...
Page 23
USER MANUAL ver.01 PROJECT NO.: 018663712 Page 23 of 24...
Page 24
Website: www.woodrive.eu Contact: info@woodrive.eu Patent pending: EP23187981.8 Registered design: 008860928 Registered mark WOODRIVE BY MELU: 018663712 USER MANUAL ver.01 PROJECT NO.: 018663712 Page 24 of 24...
Need help?
Do you have a question about the WooDrive E and is the answer not in the manual?
Questions and answers