Wienold Lifte SLK 10 Operation Manual

Superlift with counterweights

Advertisement

Quick Links

Operation Manual
SLK
Superlift with Counterweights
SLK 10
SLK 15
SLK 20
SLK 25
-
.de
Release: 2.0
25.05.2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SLK 10 and is the answer not in the manual?

Questions and answers

Summary of Contents for Wienold Lifte SLK 10

  • Page 1 Operation Manual Superlift with Counterweights SLK 10 SLK 15 SLK 20 SLK 25 Release: 2.0 25.05.2021...
  • Page 2: Table Of Contents

    Operator's Manual Important Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall be permitted to operate this machine. This manual should be considered a permanent part of your machine and should remain with the machine at all times.
  • Page 3: Safety

    Operator's Manual Safety Rules Warning Failure to obey the instructions and safety rules in this manual may result in death or serious injury. Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual.
  • Page 4 Operator's Manual SAFETY RULES Fall Hazards Do not raise the load unless the load handling attachment is properly Do not use the machine as a personnel lifting secured to the machine. platform or step. Do not use blocks to level Do not stand on the load handling attachments.
  • Page 5 Operator's Manual SAFETY RULES Do not place ladders or scaffolding against any part Electrocution Hazards of the machine. This machine is not electrically insulated and will not provide protection from contact with or proximity to electrical current. Keep away from the machine if it contacts energized power lines.
  • Page 6 Operator's Manual SAFETY RULES Crushing Hazards Collision Hazards Do not raise if the load is not properly centered on Check the work area for the load handling attachment. overhead obstructions or other possible hazards. Do not raise unless the load is properly secured to the load handling attachment.
  • Page 7 Operator's Manual SAFETY RULES Damaged Machine Hazards Decal Legend Do not use a damaged or Genie product decals use symbols, color coding malfunctioning machine. and signal words to identify the following: Do not use a machine with a Safety alert symbol—used to alert worn, frayed, kinked or damaged personnel to potential personal cable.
  • Page 8: Legend

    Operator's Manual Legend Standard Forks Crane Boom 01 Mast brace 02 Loading wheels/steer handles 03 Snap pin 04 Lifting shackle 05 Fork mounting bracket 06 Fork extension 07 Fork extension retaining pin Wienold Superlift with counterbalance weights...
  • Page 9: Pre-Operation Inspection

    Operator's Manual Pre-operation Inspection Fundamentals The pre-operation inspection is a visual inspection performed by the operator prior to each work shift. This inspection is designed to discover if anything is apparently wrong with a machine before the operator tests it. Do Not Operate Unless: Refer to the list on the next page and check each of the items.
  • Page 10 Operator's Manual PRE-OPERATION INSPECTION Pre-operation Inspection Be sure that the operator’s manual is complete, Check the entire machine for: legible and in the storage container located on Dents or damage the machine. Corrosion or oxidation Be sure that all decals are legible and in place. See Decals section.
  • Page 11: Function Tests

    Operator's Manual Function Tests Fundamentals The function tests are designed to discover any malfunctions before the machine is put into service. The operator must follow the step-by-step instructions to test all machine functions. A malfunctioning machine must never be used. If Do Not Operate Unless: malfunctions are discovered, the machine must be tagged and removed from service.
  • Page 12 Operator's Manual FUNCTION TESTS Straddle Base Function Tests 1 Place a 2 inch / 5.1 cm block under one leg 1 Select a test area that is firm, level and free of swivel caster. obstructions. 2 Loosen the arm lock knob on the opposite Setup adjustable arm.
  • Page 13 Operator's Manual FUNCTION TESTS Adjustable Forks and Adjustable Fork Options Flat Forks 1 Place the forks inside the carriage. 1 Place the fork mounting bracket inside the carriage. 2 Insert the retaining pin. 2 Insert the retaining pin. 3 Adjust the forks to the desired width and 3 Adjust the forks to the be sure the snap pin...
  • Page 14 Operator's Manual FUNCTION TESTS Test One-Speed Winch Operation Test Two-Speed Winch Operation 1 Install a load handling attachment. 1 Install a load handling attachment. 2 Raise the carriage by firmly grasping the winch 2 Shift the winch to the slow speed. handles and rotating them towards the mast.
  • Page 15: Workplace Inspection

    Operator's Manual Workplace Inspection Be aware of and avoid the following hazardous situations: · drop-offs or holes · bumps and floor obstructions · debris Do Not Operate Unless: · sloped surfaces · unstable or slippery surfaces You learn and practice the principles of safe ·...
  • Page 16: Operating Instructions

    Operator's Manual Operating Instructions Fundamentals The Operating Instructions section provides instructions for each aspect of machine operation. It is the operator's responsibility to follow all the safety rules and instructions in the operator's manual. Do Not Operate Unless: Using the machine for anything other than lifting material is unsafe.
  • Page 17 Operator's Manual OPERATING INSTRUCTIONS Setup Moving Machine with a Load Select an area that is firm, level and free of It is best to move the machine on the worksite with obstructions. no load. Moving a raised load should be restricted to positioning for loading and unloading.
  • Page 18: Load Capacity Charts

    Operator's Manual Load Capacity Charts Forks Load Positioning Instructions 1 Determine the weight of the load and the location of its load center. 2 Measure to the load center from the side of the Observe and Obey: load that will be closest to the carriage. Failure to properly position the load may result in 3 Refer to the chart on the next page to determine death or serious injury.
  • Page 19 137 kg SLK 5 450 kg 450 kg 369 kg 303 kg 248 kg 203 kg 167 kg 137 kg SLK 10 450 kg 450 kg 369 kg 303 kg 248 kg 163 kg 133 kg 109 kg SLK 15...
  • Page 20: Transport And Lifting Instructions

    Operator's Manual Transport and Lifting Instructions 5 Lock the rear base casters. 6 Place the machine against the vehicle. Use Observe and Obey: proper lifting techniques to load the machine into the transport vehicle. Be sure to check that the carriage is locked in the lowered position. The transport vehicle must be parked on a level surface.
  • Page 21: Specifications

    Operator's Manual Specifications Model SLK-5 SLK-10 SLK-15 SLK-20 SLK-25 Height-Stowed 2,04 m 2,04 m 2,04 m 2,04 m 2,04 m Working height 2,00 m 3,50 m 5,00 m 6,50 m 7,90 m Length-Stowed 74 cm 74 cm 74 cm 74 cm 79 cm Length-Operating 1,5 m...
  • Page 22 Operator's Manual SPECIFICATIONS Dimensions SLK-5 SLK-10 SLK-15 SLK-20 SLK-25 Standard Forks forks down 4 ft 10 9 ft 9 in 14 ft 7 19 ft 6 in 24 ft 4 in 1.5 m 4.5 m 5.9 m 7.4 m forks up 6 ft 7 in 11 ft 5 16 ft 4 in...
  • Page 23 Notes...
  • Page 24 Norbert Wienold GmbH Industriegebiet Waldstr. 35a München - Frankfurt D-48488 Emsbüren | Germany Leverkusen - Walsrode Brandenburg - Emsbüren Tel. +49 (0) 59 03 - 93 94 0 Fax +49 (0) 59 03 - 93 94 50 www.wienold-lifte.de e-mail: info@wienold-lifte.de...

This manual is also suitable for:

Slk 15Slk 20Slk 25

Table of Contents