Related Manuals for Philips 288E2E
Summary of Contents for Philips 288E2E
- Page 1 User Manual of Product 1: PHILIPS 288E2E 28" Frameless Monitor, 4K UHD 3840x2160 IPS, 120% sRGB, FreeSync, Height Adjustable, VESA, 4Yr Advance Replacement...
- Page 2 Brilliance 279P1 241B8 www.philips.com/welcome EN User manual Customer care and warranty 27 Troubleshooting & FAQs...
-
Page 3: Table Of Contents
8.1 Resolution & Preset Modes ... 25 9. Power Management ....26 10. Customer care and warranty . 27 10.1 Philips’ Flat Panel Monitors Pixel Defect Policy ....27 10.2 Customer Care & Warranty ..30 11. Troubleshooting & FAQs ..31 11.1 Troubleshooting ...... -
Page 4: Important
DC power cord for normal operation. 1.1 Safety precautions and • Please use approved power cord maintenance provided by Philips all the time. If your power cord is missing, please Warnings contact with your local service Use of controls, adjustments or center. - Page 5 1. Important tilt angle maximum is exceeded, the panel. When moving your monitor, monitor damage will not be covered grasp the frame to lift; do not lift under warranty. the monitor by placing your hand or fingers on the LCD panel. • Do not knock or drop the monitor during operation or transportation.
-
Page 6: Notational Descriptions
1. Important Important information for Burn-in/ Note Ghost image Consult a service technician if the monitor does not operate normally, or • Always activate a moving screen you are not sure what procedure to take saver program when you leave when the operating instructions given your monitor unattended. -
Page 7: Disposal Of Product And Packing Material
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end- of-life management primarily entails This marking on the product or on participation in national take-back... -
Page 8: Setting Up The Monitor
Quick the stand tightly. Start Register your product and get support at www.philips.com/welcome (4) Gently attach the stand to the VESA mount area until the latch locks the stand. Power *USB C-C/A... - Page 9 USB C driver. You can find the “LAN Drivers” from CD USB C disk if bundled or go to Philips website USB Type-A support page to download the driver. Please follow the steps for the installation: 1.
- Page 10 ON at all times to be able to follow Window’s instructions to use this function. proceed with installation. Some select Philips displays may not 3. It will show “success” when the Power or Charge your device when installation is finished.
-
Page 11: Operating The Monitor
What is On-Screen Display (OSD)? Description of the control buttons On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. - Page 12 2. Setting up the monitor Resolution notification Note This monitor is designed for optimal If this display has "DPS" for ECO design, performance at its native resolution, the default setting is "ON" mode: it 3840 x 2160. When the monitor is makes the screen looks slightly dim;...
- Page 13 2. Setting up the monitor Physical Function Height adjustment Tilt 35° -5° 150mm Pivot Swivel +180° -180° 0° 0° -90° 90° Warning • To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees.
-
Page 14: Remove The Base Assembly For Vesa Mounting
2. Setting up the monitor Note 2.3 Remove the Base Assembly This monitor accepts a 100mm x 100mm for VESA Mounting VESA-Compliant mounting interface. Before you start disassembling the VESA Mounting Screw M4. Always monitor base, please follow the contact manufacturer for wall-mount instructions below to avoid any possible installation. -
Page 15: Image Optimization
experience. How does it work? SmartImage is an exclusive, leading edge Philips technology that analyzes the content displayed on your screen. Based on a scenario you select, SmartImage dynamically enhances the • EasyRead: Helps improve reading... - Page 16 LCD monitors. general office applications. Typical uniformity is measured around 75-80%. By enabling Philips • Photo: This profile combines color SmartUniformity feature, display saturation, dynamic contrast and uniformity is incr eased to above sharpness enhancement to display 95%.
-
Page 17: Smartcontrast
3. Image Optimization • HDR Photo: Enhancing red, green, 3.2 SmartContrast and blue for true-to-life visuals. What is it? • Personal: Customize available settings in picture menu. Unique technology that dynamically analyzes displayed content and • Off: No optimization by SmartImage automatically optimizes a Monitor's HDR. -
Page 18: Hdr(279P1Lr)
3. Image Optimization 3.3 HDR(279P1LR) HDR Settings in Windows10 system. Steps 1. Right click on the desktop, enter to Display settings. 2. Select the display/monitor. STEP 5 3. Adjust resolution to 3840 x 2160 4. Turn the “HDR and WCG” to on mode. -
Page 19: Lightsensor
4.LightSensor 4. LightSensor What is it? Light Sensor is a unique and intelligent way of optimizing picture quality by measuring and analyzing the incoming signal to automatically adjust picture quality settings. Light Sensor uses a sensor to adjust the picture brightness depending on the room light conditions. -
Page 20: Powersensor
5. PowerSensor™ detection signal for distances up to 5. PowerSensor™ 120 cm or 47 inches. (Setting 4) • Since some dark colored clothing How does it work? tends to absorb infrared signals even when the user is within 100 cm • PowerSensor works on principle or 40 inches of the display, step up of transmission and reception of... - Page 21 5. PowerSensor™ Note A manually selected PowerSensor mode will remain operational unless and until it is readjusted or the default mode is recalled. If you find that the PowerSensor is excessively sensitive to nearby motion for some reason, please adjust to a lower signal strength. Keep sensor lens clean, if the sensor lens is dirty, wipe it with alcohol to avoid reducing of distance detection .
-
Page 22: Power Delivery And Smart Power(279P1)
What is it? brightness value of the monitor. Smart Power is an exclusive Philips You may adjust the brightness value technology that provides flexible power manually to increase power delivery delivery options for various devices. -
Page 23: Designs To Prevent Computer Vision Syndrome (Cvs)
3. Ideal working posture syndrome (CVS) • Reposition your screen to Philips monitor is designed to prevent appropriate height and angle eye strain caused by prolonged according to your height. computer use. 4. Choose Philips monitor for easy-on- Follow below instructions and use eyes. -
Page 24: Technical Specifications
8.Technical Specifications 8. Technical Specifications Picture/Display Monitor Panel Type IPS Technology Backlight W - LED Panel Size 27" W (68.6 cm) Aspect Ratio 16:9 Pixel Pitch 0.1554 (H) mm x 0.1554 (V) mm Contrast Ratio(typ.) 1000:1 Optimum Resolution 3840 x 2160 @ 60 Hz Viewing Angle 178°... - Page 25 8.Technical Specifications Convenience Built-in speaker 3 W x 2 User Convenience English, German, Spanish, Greek, French, Italian, Hungarian, Dutch, Portuguese, Brazil Portuguese, OSD Languages Polish, Russian, Swedish, Finnish, Turkish, Czech, Ukranian, Simplified Chinese, Traditional Chinese, Japanese, Korean Other Convenience VESA mount (100 x 100 mm), Kensington Lock Plug &...
- Page 26 8.Technical Specifications Off mode 0.3 W 0.3 W 0.3 W Off mode(AC switch) AC Input AC Input AC Input Heat Dissipation* Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 50Hz 230VAC , 50Hz 121.50 BTU/hr 121.16 BTU/hr 120.82 BTU/hr Normal Operation (typ.)
- Page 27 Finish Texture Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet. 2. SmartUniformity and Delta E information sheets are included in the box. 3. When [Smart Power] turns on, USB-C can delivery up to 90W(279P1).
-
Page 28: Resolution & Preset Modes
8.Technical Specifications 8.1 Resolution & Preset Modes Maximum Resolution 3840 x 2160 @ 60 Hz Recommended Resolution 3840 x 2160 @ 60 Hz H. freq Resolution V. freq (Hz) (kHz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 35.00 640 x 480 66.67... -
Page 29: Power Management
9.Power Management The following setup is used to measure 9. Power Management power consumption on this monitor. • Native resolution: 3840 x 2160 If you have VESA DPM compliance display card or software installed in your PC, the • Contrast: 50% monitor can automatically reduce its power • Brightness: 70% consumption when not in use. -
Page 30: Customer Care And Warranty
Pixel Defect Policy single black pixel. Other combinations of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the industry's most advanced... - Page 31 Black Dot Defects the warranty period, a TFT Monitor Black dot defects appear as pixels or panel in a Philips flat panel monitor sub pixels that are always dark or 'off'. must have pixel or sub pixel defects That is, a dark dot is a sub-pixel that...
- Page 32 10.Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
-
Page 33: Customer Care & Warranty
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below. -
Page 34: Troubleshooting & Faqs
• Contact with Philips customer • First, ensure that the power button service representative immediately. on the front of the monitor is in the... -
Page 35: General Faqs
"burn-in", also Service contact information listed in known as "after-imaging" or "ghost Important information manual and imaging", on your screen. "Burn-in", contact Philips customer service "after-imaging", or "ghost imaging" representative. is a well-known phenomenon in * Functionality different according to LCD panel technology. - Page 36 • Shut down your computer, soft cloth. For extensive cleaning, disconnect your old monitor and please use isopropyl alcohol. Do reconnect your Philips LCD monitor. not use other solvents such as • Turn on your monitor and then turn ethyl alcohol, ethanol, acetone, on your PC.
- Page 37 “ghost image” symptoms any PC, workstation or Mac? that will not disappear and cannot be repaired. The damage mentioned above Ans.: Yes. All Philips LCD monitors are is not covered under your warranty. fully compatible with standard PCs, Macs and workstations.
- Page 38 This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.
Need help?
Do you have a question about the 288E2E and is the answer not in the manual?
Questions and answers