Advertisement
Quick Links
Section I: How To Connect VR-N7500 With Cell-phone
1，For Android user
Go to Google Play download ,Search "HT",
the icon as right photo.
Scan the QR code to download the HT APP
or visit the website:
http://www.vgc.net.cn/download/22-en.html
For IOS user
Search 'BS HT' in APPLE store to download
2，Open the app, select-[BIND NEW DEVICE]. Turn-on the radio, then press
in the menu to enter the pairing state
now in pairing status
3，Select the scanned device then bind it
，
4
Some mobile phone Bluetooth pairing requires authorization, so
select to confirm Bluetooth pairing can be paired successfully.
Warm:
Before starting to use the device, please connect your phone to synchronize the time zone to the device,
and set the name of the device so that the GPS can work normally.please be sure to install the antenna
before turning it on(the radio will be damaged if it is not connected to an antenna).
Function keys:
①Power and volume switch.
Turn the top knob clockwise to switch on. Turn the knob to increase or decrease volume level.
When using a wireless BT hand microphone or earphone, please note the Speaker setting in the
HT App needs to be Off or Auto, both settings will make the volume knob useless.
②BDS+GP S built-in antenna. (Do not press, the position of the face needs to be up and open to the
sky to receive BDS or GPS signal)
Note : Local GPS time zone is
③P1 key (orange key). (Custom functions can be set in the APP)
VR-N75 Fast Operate Manual
, a 'BEEP' will be heard and red-green light flashing means the radio is
synchronize
t from the phone .
orange key
twice or o
MUST
check the phone menu,
pen the [Pairing]
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for VGC VR-N75
Summary of Contents for VGC VR-N75
- Page 1 VR-N75 Fast Operate Manual Section I: How To Connect VR-N7500 With Cell-phone 1，For Android user Go to Google Play download ,Search “HT”, the icon as right photo. Scan the QR code to download the HT APP or visit the website: http://www.vgc.net.cn/download/22-en.html...
-
Page 2: Keypad Function Keys
1, [ Double-click the top button] Used for pairing external devices such as mobile phones, Bluetooth headsets, BT wireless PTTs, BT wireless hand microphones, etc. A "ding-dong" prompt sounds when in external pairing state. You can also directly open the [Pairing] from the menu on the radio. 2,[Short press] to turn on or off the FM radio. - Page 3 ④Down key. Page down. ⑤ Back/Change screen key. In the menu mode, it is the return key. In the standby screen mode, it is the switch screen key. Press this key repeatedly to switch back and forth between the three screen modes. ⑥...
-
Page 4: Electronic Compass
Electronic compass ① Sensor prompt icon. The "=" icon in the middle of the electronic compass means that it is disturbed by the external environment. You need to enter the menu [Compass] and perform correct ion operations according to the on-screen instructions. -
Page 5: Split Screen Display
⑦ Channel. The channel corresponding to the primary and secondary segments. ⑧Field strength: The receiving field strength indication of the receiving frequency band. ⑨ Auxiliary data. [Speed] What the current speed is when receiving BDS/GPS. [Altitude] What the altitude is when receiving BDS/GPS. 【Temperature】Current temperature. - Page 6 Phone Application and Settings Connect to Bluetooth PTT Microphone Open the [Pairing] in the menu to enter the pairing state, a 'BEEP' will be heard. Long press the Connect to Bluetooth speaker mic Open the [Pairing] in the menu to enter the pairing state, a 'BEEP' will be heard. Turn on the Bluetooth speaker mic, double press to enter pairing status.
Need help?
Do you have a question about the VR-N75 and is the answer not in the manual?
Questions and answers