Xyron Creative Station - Multi-Use Applicator Manual

Features

All-in-one laminator, sticker and magnet maker.

	Make what you want. Easily transform almost anything with Permanent and Repositionable Adhesive, Laminated Adhesive, Two-Sided Laminate, and Laminated Magnet.		Switch functions fast. Quickly change drop-in cartridges at any time without hassle. Uses both 9" and 5" continuous roll cartridges to help minimize waste and maximize flexibility.
	Stay clean. Ditch messy adhesives for professional results, all while keeping work surfaces, hands, and projects clean.		Save time. Get immediate results anywhere with processes that don't require warm-up, cool-down or dry time.

1. Feed. Feed your item into the machine on the feed tray using the alignment guides.
   
2. Turn. Turn the handle clockwise while you continue to feed the item completely through.
   
3. Trim. Press down and slide trimmer to cleanly cut. Remove clear film and peel your sticker.
   

1. Open cartridge compartment by pushing button and lifting the lid.
   
2. Pull cartridge up and out of the machine.
   
3. Drop the cartridge into the machine using the internal tracks as a guide. The label on the cartridge should be facing you.
   

4. Place material flap between the 2 rollers.
   
5. Close the lid by pressing down until it clicks into position.
   

For 5" Cartridges

Follow steps 1 and 2. Flip up the 5" cartridge adapter in the bottom of the machine. Proceed with step 3 using the adapter and the internal track as guides.

Permanent Adhesive*

Repositionable Adhesive

*only application with 3" cartridge

Laminated Adhesive *

* 5" cartridge only

Two-Sided Laminate

1. After trimming from machine, cut item right up to the edge. Laminate will not peel.
   

Laminated Magnet

Helpful Tips

General Tips:

• For best results, turn handle slowly.
• Use items that are 1/8" thick or less.
• Arrange multiple items on feed tray to maximize cartridge use.
• Clean rollers with isopropyl alcohol as needed.
• Store your machine and cartridges in a cool, dry place.
• If your handle turns but nothing is coming out, be sure your lid is closed.
• Use a variety of materials: paper, cardstock, vellum, canvas, burlap, fabric, ribbon, twill, twine, craft foam, tissue paper, felt, cork, thin wood and acrylic, photos, paper flowers, thin metal sheets, and newspaper.

Fabric Tips:

• Wash sizing from fabric.
• For items that will be washed, stitch after adhering.
• For best results, use Permanent Adhesive.

Permanent and Repositionable Adhesive:

• When feeding multiple items, do not overlap to ensure edge-to-edge coverage.
• Remove excess adhesive with your finger or Xyron^® Adhesive Eraser (sold separately).

Two-Sided Laminate:

• NOT recommended for one-of-a-kind items.
• Before inserting your item, test a few inches to ensure no wrinkles are present.
• If a wrinkle occurs, fold a piece of cardstock to 4" x 4" and run it through the center of the machine until you see the laminate smooth out.

www.xyron.com