Targeted adhesive applicator. Stay clean. Be efficient. Apply permanent dot matrix adhesive Comfortable handle and accurate without the gummy mess. applicator put you in total control. Change fast. Easily refill or switch widths with drop-in cartridges. Xyron Mega Runner Adhesive Applicator ®...
Preloaded with 100 feet of permanent adhesive. Position. Press. Pull. Pull down protective cap to expose Press down to apply even pressure. Slowly pull to run a strip of adhesive. and position the adhesive tip to item surface. Xyron Mega Runner Adhesive Applicator ®...
Open cartridge Pull cartridge up Drop the cartridge Close the lid by compartment by and out of the into the applicator. pressing down until it pushing button applicator. clicks into position. and lifting the lid. Xyron Mega Runner Adhesive Applicator ®...
Remove • Remove excess adhesive with your finger or Xyron ® the cartridge from the applicator and tighten by turning Adhesive Eraser (sold separately).
Need help?
Do you have a question about the Mega Runner and is the answer not in the manual?
Questions and answers