Advertisement
Quick Links
ThawSTAR® CFT1.5
Quick Start
Upon power-up of instrument, please allow 5 minutes for instrument warm-up.
Instrument is warmed up and in "ready" state. Insert
a clean, tightly capped frozen 1.5 mL cryogenic vial
(below -70°C) containing up to 1.5 mL volume into
the opening on the top of the instrument.
Beginning of solid to liquid phase change is
detected by instrument.
Upon thaw completion, the vial is raised approxi-
mately 1 cm (0.4 in).
Quick Start Guide
Push the top of the vial down gently until the
instrument emits a deep dual tone. The vial
will now remain in a depressed position.
Countdown of the last 10 seconds of the
thawing process begins.
Remove vial immediately and for a few
seconds, manually agitate the vial gently
from side to side to equilibrate the liquid
temperature until no ice can be seen within the
vial. Begin downstream protocol.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for BioLife ThawSTAR CFT1.5
Summary of Contents for BioLife ThawSTAR CFT1.5
- Page 1 ThawSTAR® CFT1.5 Quick Start Guide Quick Start Upon power-up of instrument, please allow 5 minutes for instrument warm-up. Instrument is warmed up and in “ready” state. Insert Push the top of the vial down gently until the a clean, tightly capped frozen 1.5 mL cryogenic vial instrument emits a deep dual tone.
- Page 2 Avoid sticking forceps or other and remove from opening, taking care foreign objects into the opening. not to open the cap. Instrument will ©2020. BioLife Solutions, Inc. All rights reserved. Patents pending. ThawSTAR designations are trademarks owned info@biolifesolutions.com | www.biolifesolutions.com by BioLife Solutions, Inc.
Need help?
Do you have a question about the ThawSTAR CFT1.5 and is the answer not in the manual?
Questions and answers