Download
Share
Print this page
  1. Manuals
  2. Brands
  3. NEO Manuals
  4. Touch terminals
  5. SST
  6. Quick start manual

NEO SST Quick Start Manual

Pedestal to bench mount
Hide thumbs

Advertisement

Quick Links

Download this manual
SST Pedestal to Bench Mount
Kiosk conversion
Quick Start Guide
Part# 15301-GA0xx
Convert to SST Kiosk with BNA Enclosure
Current SST Kiosk with Pedestal
NeoProducts Pty Ltd ACN 007 152 374 ABN 76 007 152 374, 62-66 Pacific Drive, Keysborough, Vic, 3173
Telephone 03 9701 1511
www.neoproductsgroup.com
15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513
Page 1 of 36

Advertisement

loading
Need help?

Need help?

Do you have a question about the SST and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for NEO SST

Summary of Contents for NEO SST

  • Page 1 Current SST Kiosk with Pedestal NeoProducts Pty Ltd ACN 007 152 374 ABN 76 007 152 374, 62-66 Pacific Drive, Keysborough, Vic, 3173 Telephone 03 9701 1511 www.neoproductsgroup.com 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 1 of 36...
  • Page 2 SST Bench Mount NeoProducts Pty Ltd ACN 007 152 374 ABN 76 007 152 374, 62-66 Pacific Drive, Keysborough, Vic, 3173 Telephone 03 9701 1511 www.neoproductsgroup.com 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 2 of 36...
  • Page 3 Desk BNA Enclosure, Wall Mount Enclosure & Pedestal Enclosure: 002. Note: Refer to 15301-ML008 Betmakers SST_Quick Start Guide_ECN 6371 for further information regarding Key Tags & Lock Decals. MEI Cashbox: 5031. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 3 of 36...
  • Page 4 Network Power Power and Network ports are accessed from inside of the Kiosk unit and routed through the Kiosk / Pedestal LH Side access hole. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 4 of 36...
  • Page 5 Retain blue Network Cable for re-fitment in the Kiosk if reverting to Pedestal set-up. Inside the Kiosk, BNA USB and Power Extension Looms are in the Kiosk / Pedestal RH Side access hole. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 5 of 36...
  • Page 6 Loom to the Kiosk frame. Disconnect the BNA USB (A) and Power Extension Loom (B) connectors from the front of the Kiosk RH Side Bracket – refer connectors highlighted. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 6 of 36...
  • Page 7 Store the Kiosk for refitment to the BNA Enclosure in later Step. Note: Take care to ensure that all Looms are bundled up into the Kiosk to eliminate damage during storage. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 7 of 36...
  • Page 8 Head Screwdriver. Completely remove the BNA Frame from the Pedestal by pulling in an outwards direction. Ensure Power & USB Connectors are not damaged during removal. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 8 of 36...
  • Page 9 Remove & discard the packaging tape & cardboard. Remove the Bench Mount No BNA w Ticket Lip packaging from Pallet. Remove & discard the packaging tape & cardboard. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 9 of 36...
  • Page 10 Frame as shown. Select the following fasteners from the BNA Plate kit: • 1x Screw M4x16 (1). • 1x Spacer (2). • 1x Screw M4x8 (3). 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 10 of 36...
  • Page 11 (BNA removed), insert 2x Cable Clamp (6) over the thread and install 2x M4 Wizlock Nuts (5) as shown. Fasten using 7mm Socket Head Drive & Handle. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 11 of 36...
  • Page 12 Feed the 2x BNA Looms into each Cable Tie Twist Lock as shown. Select 1x USB2.0 - 0.60M BM - BF (Molded) (8) & 1x 12V BNA Loom Adaptor (9) from packaging. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 12 of 36...
  • Page 13 Push USB2.0 - 0.60M BM - BF (Molded) (8) and 12V BNA Loom Adaptor (9) into BNA connectors. Hint: These are the Plugs aligned together in the earlier Step. Ensure Connectors “Clip” into position. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 13 of 36...
  • Page 14 Re-install BNA into BNA Frame. Select BNA Enclosure. Unlock and open the BNA Enclosure Door by unlocking the Lock on the top of the BNA using Key# supplied. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 14 of 36...
  • Page 15 BNA Head. The Bezel was required for the Pedestal variant BNA only. This cannot be used for the BNA Enclosure variant BNA. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 15 of 36...
  • Page 16 The connector should make a small click sound at its maximum depth. Reassemble the BNA Bezel onto the BNA Head. Check that the BNA Bezel wires are routed towards the outside of the Bezel. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 16 of 36...
  • Page 17 Connect 2x terminals of the black & brown wires on the 12V BNA Loom Adaptor into the tabs of the BNA Enclosure Door Switch as shown. Note: View from inside of the BNA Enclosure. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 17 of 36...
  • Page 18 Tilt the Kiosk approx. 15°. 15° SST Bench Mount rear slot Gently slide the Kiosk into the rear slot of the SST Bench Mount to a stop position & lower the Kiosk down onto the 2x SST Bench Mount Studs.
  • Page 19 Kiosk, install 2x M6 Black Clamping Knobs onto Studs and firmly hand tighten. Note: Peripheral Drawer assembly removed for clarity. Slide Peripheral Drawer back into position. Close Lower Door. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 19 of 36...
  • Page 20 (250mm) to the end of the plug as shown. Use the Grommet Crimping Pliers to assist clamping of the Cable Clamp. 250m 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 20 of 36...
  • Page 21 Phillips Head Screwdriver. Retain 4x Screws & Rear Cover for re-fitment in later Step. At the front of the Kiosk, slide out the Peripheral Drawer. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 21 of 36...
  • Page 22 Guide the Side Power Inlet Bracket with earthed IEC Cable & Ethernet port into the Kiosk. Push the Side Power Inlet Bracket downwards to engage on the retaining tabs. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 22 of 36...
  • Page 23 Route the black Ethernet Cable from the Side Power Inlet Bracket into the Kiosk & up into the NUC Port. Push the Ethernet Cable into the NUC Port as shown. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 23 of 36...
  • Page 24 Extension from the Power Tray & Power Adaptor in locations highlighted. The Plug on the IEC Extension will indicate “125V” as highlighted. Dispose of “125V” IEC Extension. Remove Remove 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 24 of 36...
  • Page 25 Step) into the locations highlighted. Fasten using #2 Phillips Head Screwdriver. Slide Peripheral Drawer assembly back into position. Close Lower Door & LCD Screen Door. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 25 of 36...
  • Page 26 Kiosk from Pedestal for further information). Unlock, and open the LCD Screen Door by unlocking the Lock at the Right-hand side of the Kiosk using T0001 Key# provided. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 26 of 36...
  • Page 27 Align the 3x Pins into the holes of the Kiosk. Install 3x M6 Black Clamping Knobs onto the Studs and firmly hand tighten. Note: Components removed for clarity. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 27 of 36...
  • Page 28 Ports on the D-Link Hub 7 Port. Install pass-through of the 12v BNA Loom adaptor into the BNA Harness Bracket located inside Kiosk on the RH Side. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 28 of 36...
  • Page 29 Connect the BNA Enclosure USB into the 2 Connector of the 12v BNA Loom adaptor. Use the Cable Twist Ties to retain the 12v BNA Loom adaptor as shown. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 29 of 36...
  • Page 30 Refer to the Block Diagram image for the location of Connectors into the USB D-LINK HUB 7 PORT. All Connectors detailed in the following Steps are to follow this Block Diagram. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 30 of 36...
  • Page 31 T0001 the Kiosk using Key#: provided. This provides access to the Kiosk power switch. Switch unit from O → I (note: components removed for clarity). 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 31 of 36...

  • Page 32: Loading Printer Paper

    Stage 2: Close & lock the LCD Screen Door via the Lock at the Right-hand side of the Kiosk using the key provided. Stage 1 Stage 2 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 32 of 36...
  • Page 33 The Modem is in the Main Frame against the rear wall. Modem Insert SIM Card into Modem from the rear in the orientation shown. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 33 of 36...

  • Page 34: Monitor Adjustment

    Select “Menu” button. Navigate settings following the Menu. The Monitor Adjustment Menu will disappear after approx. 10 seconds. Reselect “Menu: button to continue process. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 34 of 36...
  • Page 35 NOTE: Components removed for clarity. Unlock and open the BNA Enclosure Door by unlocking the Lock on the top of the BNA using Key# supplied. 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 35 of 36...
  • Page 36 Remove the MEI Cashbox from the BNA Cradle by firmly pulling the yellow handle. Unlock and open the MEI Cashbox by unlocking the 5031. Lock using Key# 15301-ML022 Quick Start Guide - SST Pedestal to Bench Mount_ECN 6513 Page 36 of 36...