Table of Contents
Advertisement
Quick Links
HEATER DEFAULT SETTING:
The default factory setting for your thermostat is 72 degrees. If your room temperature is already 72 degrees
or above, then your heater will shut OFF after about 3 minutes. See thermostat directions for how to adjust
the temperature settings in order to keep your heater ON until your desired room temperature is reached.
If you have any questions regarding the use of this unit or find that your fireplace/heater unit needs service, please do not
return the unit to the store where you purchased it. Instead, please contact our Customer Service Department and have
your instructions and parts list ready to provide the model name, part name, or factory number.
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
We appreciate the trust and confidence you have placed in Whalen Furniture through the purchase of this electric fireplace/heater. We
strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for
your home improvement needs. Thank you for choosing Whalen Furniture Manufacturing!
USE AND CARE GUIDE
COMBINATION ELECTRIC FIREPLACE/HEATER
US and International Patents Pending
Whalen Customer Service
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our website www.whalenfurniture.com / www.whalenstyle.com
Or e-mail your request to: parts@whalenfurniture.com
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date: 2019-03-11
Model # EF22-23C
# EF22-26C
1-866-942-5362
THANK YOU
Rev 0001-B
LOT NUMBER:
DATE PURCHASED:
/
/
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Whalen EF22-23C
Summary of Contents for Whalen EF22-23C
- Page 1 THANK YOU We appreciate the trust and confidence you have placed in Whalen Furniture through the purchase of this electric fireplace/heater. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
-
Page 2: Table Of Contents
Table of Contents Table of Contents ............2 Package Contents ............4 Safety Information ............2 Operation ............... 5 Important Safety Information .......... 2 Using the Remote Control ..........7 Grounding Instructions ............ 3 Care and Maintenance ............. 8 Troubleshooting .............. 9 Warranty ................ -
Page 3: Grounding Instructions
Safety Information (continued) GROUNDING INSTRUCTIONS DANGER: Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. -
Page 4: Pre-Operation
Pre-Operation ELECTRICAL SPECIFICATIONS □ Voltage: 120 V AC, 60 Hz Watts: 1 5 00 Watts □ PACKAGE CONTENTS Part Description Quantity Fireplace Remote control... -
Page 5: Operation
Operation Identifying the control panel Understanding the function indicator □ The control panel is located on the top left corner of □ The function indicator (2) has three square LEDs – red, the fireplace/heater unit. green, and blue. The red LED indicates that the Fahrenheit temperature heating function is running, the □... - Page 6 Operation (continued) Using the heater control NOTE: The heater default temperature is set to 72 degrees Fahrenheit. If your ambient room temperature is above 72 degrees, then your heater will automatically shut off after few minutes. Adjust your heater thermostat (see below) to a higher temperature in order to keep your heater ON above 72 degrees.
-
Page 7: Using The Remote Control
Operation (continued) □ To unlock the flame function, press and hold the flame button (5) for five seconds. The log lights flash several times and then both flame lights and log lights turn on. Using the main power button Using the Demo Mode □... -
Page 8: Care And Maintenance
Using the Remote Control (continued) Battery Replacement NOTE: Do not mix old and new batteries. Do not mix alkaline, standard (carbon zinc), or rechargeable (nicad, nimh, etc.) batteries. WARNING: Do not ingest batteries. NOTE: 1. Non-rechargeable batteries are not to be recharged. Battery disposal 2. -
Page 9: Troubleshooting
Troubleshooting Problem Solution The control panel display shows “00” when the power button, □ Fireplace is in Demo Mode. Flip rocker switch to "O" timer button, or heater button is pressed, but no normal position to turn demo mode off. functions occur.
Need help?
Do you have a question about the EF22-23C and is the answer not in the manual?
Questions and answers