Chefman CUSTOM-TEMP KEEP WARM RJ11-18-CTI-UK User Manual page 12

OPERATING INSTRUCTIONS
6. When your desired temperature displays on the screen, press
START/STOP to begin heating. The LED ring at the base will turn
red to indicate it's heating. During heating, the water's current
temperature will display on the screen.
7. Meanwhile, add tea to the infuser. Use loose tea (about
2 teaspoons per cup) or tea bags based on the amount of water
you're heating. (Wait to insert the infuser until the desired
temperature has been reached.)
8. When the kettle reaches the desired temperature, the kettle will
beep three times, READY will display in green on the panel and
the LED ring at the kettle's base will turn green. Carefully lift off
the kettle lid. Slide the tea-filled infuser onto the underside of the
lid (a slight twist helps), insert it into the kettle and press the lid
to close.
9. Let tea steep according to directions or as you like. When
finished steeping, carefully remove the infuser by lifting off the
lid. If you would like to return the lid to the kettle, let the infuser
cool (you can run it under water), then carefully twist/pull it off,
and return the lid (without the infuser) to the kettle; press
to close.
12