Advertisement
Quick Links
Advertisement
Related Manuals for Reedog MX 3200 Extreme
Summary of Contents for Reedog MX 3200 Extreme
- Page 1 USER MANUAL REEDOG MX 3200 Extreme...
- Page 2 Sound Eelectrodes Intensity Vibration ON/OFF Impulse ON/OFF Indicator light Channel switch Collar pairing 1. Fully charge the transmitter and receiver using the attached cable (2-3 hours) - if the battery is weak, the indicator light will start flashing red. 2. Turn on both the receiver and the radio by long pressing the appropriate button. You can recognize an unpaired receiver by a rapidly flashing green light.
-
Page 3: Training Guide
3. With the button still pressed, touch the radio to the receiver - until you hear sound warning. Successful unpairing can be recognized by the rapidly flashing indicator light on the receiver. Training guide 1. Putting on the collar Place the collar around the dog's neck. The receiver should be located on the underside of the dog's neck, in some breeds it will naturally slide to the sides. - Page 4 Problem #4: Receiver indicates discharge very quickly. The device was left on during the break between training sessions. Make sure to turn off your device after exercising. You are exercising in very cold weather. Problem #5: The receiver is not receiving or cannot receive any signal. Check if the receiver is properly switched on.
- Page 5 The device has been approved for use in EU countries and is therefore provided with the CE All necessary documentation is available on the website: www.electric-collars.com mark. Changes to technical parameters, properties and printing errors reserved. Service center and distribution Reedog, sro Sedmidomky 459/8 101 00 Prague 10 Phone: +1 646 980 4569 info@electric-collars.eu...
Need help?
Do you have a question about the MX 3200 Extreme and is the answer not in the manual?
Questions and answers