Page 1
USER MANUAL REEDOG MX – 600 MEDIUM Function: 1) Charging – transmitter and receiver (possibility of charging both parts at the same time) 2) Submersible - transmitter and receiver (up to 2 m) 3) Adjustable vibration level and el. discharges (range 1–10) 4) Choice of 3 modes –...
Page 2
Transmitter Antenna LCD display E-Shock vibrations Sound selection of the dog ON/OFF level up/down charger socket indicator Receiver indicator collar charger socket ON/OFF...
Before first use: 1) Fully charge the radio using the attached cable (2-3 hours) when discharged, the red light flashes 2) Fully charge the receiver using the included cable (2-3 hours) red light flashes when discharged 3) Long press the on/off button on the receiver. If it flashes green quickly = it is in pairing mode mode, flashes every 5 seconds after pairing.
Page 4
CE mark. All necessary documentation is available on the importer's website, on request from the importer and at the importer's store. The address where you can find the declaration of conformity and the current instructions: https://www.elektro- obojky.cz/vycvikove-obojky/reedog-mx-600-medium Changes to technical parameters, properties and printing errors reserved. Warranty and post-warranty repairs are provided by the importer: Elektro-obojky.cz...
Page 5
The device has been approved for use in EU countries and is therefore provided with the CE All necessary documentation is available on the website: www.electric-collars.com mark. Changes to technical parameters, properties and printing errors reserved. Service center and distribution Reedog, sro Sedmidomky 459/8 101 00 Prague 10 Phone: +1 646 980 4569 info@electric-collars.eu...
Need help?
Do you have a question about the MX-600 Medium and is the answer not in the manual?
Questions and answers