Subscribe to Our Youtube Channel
Related Manuals for Coleman POWER STEEL 90423E
Summary of Contents for Coleman POWER STEEL 90423E
- Page 1 90423E/90536E/90495E/90426E POWER STEEL™ OWNER’S MANUAL DO NOT RETURN THIS ITEM TO THE STORE OR WEBSITE WHERE IT WAS PURCHASED. PLEASE VISIT BESTWAYUSA.COM/SUPPORT FOR QUESTIONS, OR FOR DEFECTIVE OR WARRANTY CLAIMS.
-
Page 3: Electrocution Risk
IMPORTANT SAFETY INSTRUCTIONS WARNINGS Read and Follow All Safety Information and Instructions. Keep for future reference. Failure to follow these warnings and instructions can result in serious injury or death to users, especially children. WARNING WARNING Prevent Drowning No Diving Children under 5 are at highest risk for drowning. -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Safety Barrier Guidelines for Residential Swimming Pool Section I: Outdoor swimming pool An outdoor swimming pool, including an inground, aboveground, or onground pool, hot tub, or spa, should be provided with a barrier which complies with the following: •... - Page 5 IMPORTANT SAFETY INSTRUCTIONS • The installation must comply with the codes of the authority having jurisdiction and may require permits for building, plumbing electrical, zoning, etc. • The pool shall be located a minimum distance of 6 ft. (1.83 m) from any electrical receptacle. •...
-
Page 6: Setup Instructions
PARTS & TOOLS NEEDED Compare the parts in your box to the parts listed in this manual. Verify that the equipment components represent the model that you had intended to purchase. If any parts are damaged or missing at the time of purchase, visit our website bestwayusa.com/support. 18 ft. - Page 7 SETUP INSTRUCTIONS CHOOSE THE CORRECT LOCATION The surface chosen to install the pool on must respect the following conditions: • Because of the combined weight of the water inside the pool and the pool users, it is extremely important that the surface chosen to install the pool on is capable of uniformly supporting the total weight for the entire time the pool is installed.
-
Page 8: Installation
INSTALLATION Install Part E with the curved edge facing outward. IMPORTANT: The vertical legs must be inserted between the liner and the belt before attaching the T-connectors. The legs must be perpendicular to the ground in two directions. 0.39 in. (1 cm) When the pool is filled with around 0.39 in. -
Page 9: Maintenance Instructions
2.0 in. - 7.9 in. (5 cm - 20 cm) IMPORTANT: Check the position of the vertical legs at times while filling the pool with water. The legs can gradually change position due to increased water weight. If the legs are not perpendicular to the ground, please stop filling the pool and adjust them. - Page 10 DISASSEMBLY & STORAGE INSTRUCTIONS DRAINING DRAINING • For draining, follow the drawings inside the manual. Drawings are for illustration purposes only. May not reflect actual product. Not to scale. • To drain your pool water, check local regulations for drainage by-laws. CLEANING •...
- Page 11 1. Find the broken area. 1. Discharge the water, fully clean and dry area to be repaired. 2. Clean the area to be repaired. 2. Cut the correct size from the Tritech PVC Material Repair Patch. 3. Carefully peel patch. 3.
- Page 12 ©2023 The Coleman Company, Inc. Coleman is a registered trademark of The Coleman Company, Inc., used under license. ® Manufactured by Bestway ® ©2023 Bestway (USA) Inc., 3435 S. McQueen Road, Chandler, AZ 85286, United States of America Trademarks used in some countries under license from Bestway Inflatables &...
Need help?
Do you have a question about the POWER STEEL 90423E and is the answer not in the manual?
Questions and answers