Hardware Installation
Note: Before installing or removing the mouse to or from your computer, always re-
member to turn off your computer. Installing or removing the mouse when your com-
puter is running will cause permanent damage to the mouse or your computer.
1.
For PS/2 model, you can connect the mouse to the PS/2 port.
For the USB model, connect your mouse to the USB port on your computer.
2.
For the USB & PS/2 model, you need to use the 6-pin PS/2 adapter.
3.
Turn on your computer.
4.
Warning: Please do not use this optical mouse on a desk which is made of glass, mir-
ror, iron, or black velvet. Also, a flat surface is necessary or the Optical Sensor will
not work properly.
Software Installation
Installing the MouseMate software
For PCs, start Windows, insert the software CD into the computer's CD-ROM
1.
drive, then follow the on-screen instructions. (If Autorun is not enabled, select
Run from the Start Menu on the Taskbar. Next, type D:\Setup.exe, where D: is
the designation of the CD-ROM drive.)
For the Macintosh, start the Macintosh operating system, insert the software CD
2.
into the computer's CD-ROM drive, find the Installer icon in the appropriate
language folder, double-click the icon, then follow the on-screen instructions.
Factory Settings
Hardware Installation
1