1. Manuals
  2. Brands
  3. KIMBALL MIDWEST Manuals
  4. Rivet Tools
  5. 48-2980
  6. Operating instructions manual

KIMBALL MIDWEST 48-2980 Operating Instructions Manual

Pneumatic rivet nut setting tool
Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

K
IMBALL
M
IDWEST
Operating Instructions Manual
Pneumatic Rivet Nut Setting Tool
48-2980
Read through this operating instructions manual carefully before using the product. Protect yourself and others
by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in
personal injury and/or damage to product or property. Please retain instructions for future reference.
KIMBALL MIDWEST PROPRIETARY - ALL RIGHTS RESERVED

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 48-2980 and is the answer not in the manual?

Questions and answers

Related Manuals for KIMBALL MIDWEST 48-2980

Summary of Contents for KIMBALL MIDWEST 48-2980

  • Page 1 Read through this operating instructions manual carefully before using the product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please retain instructions for future reference. KIMBALL MIDWEST PROPRIETARY - ALL RIGHTS RESERVED...

  • Page 2: Product Information

    For further operational and handling information or for replacement of parts and components, contact your Kimball Midwest Sales Representative or Power Tool Repair (371 West Ave. Tallmadge, OH 44278, 330-630-0022). Users of this tool should review the chemical composition of the work surface and any products used in conjunction with this tool for any hazardous chemicals prior to engaging in any activity that creates dust and/or microscopic particles.
  • Page 3 #21 Cap Nut/Wheel to freely spin. If the rear spinning wheel does not spin freely, adjust the #10 lock nut and #7 Spindle Guide until it does move freely with the #4 housing installed. KIMBALL MIDWEST PROPRIETARY - ALL RIGHTS RESERVED...

  • Page 4: Safety Precautions

    1" 1" 1" 1" Daily 1" 1-1/4" 1-1/4" 1" Drain Daily Drain Daily 25 FEET OR MORE Oil and Water Extractor should be at least 25 ft. from the compressor. Further if possible. KIMBALL MIDWEST PROPRIETARY - ALL RIGHTS RESERVED...

  • Page 5: Parts Breakdown

    Screw Mandrel (1/4) Lock Nut, Frame Trigger Screw Mandrel (5/16) Stem, Air Piston Trigger Rod Screw Mandrel (3/8) Plate, Large Trigger Lever Spindle Guide Piston Ring Spanner E Ring Washer O-Ring Brass Regulator KIMBALL MIDWEST PROPRIETARY - ALL RIGHTS RESERVED...

  • Page 6: Limited Warranty

    Kimball Midwest shall not be liable for any incidental or consequential damages resulting from breach of this warranty. Kimball Midwest neither assumes, nor authorizes any person to assume for it, any other liability in connection with the sale of its products.

Table of Contents