Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MClimate CO2 Sensor and Notifier LoRaWAN
Summary of Contents for MClimate CO2 Sensor and Notifier LoRaWAN
- Page 1 MClimate CO2 Sensor and Notifier LoRaWAN® User manual...
- Page 2 Dutch Spanish 00359 800 3 1010 Om te weten te komen hoe Para saber cómo instalar Monday-Friday 09:00 - 18:00 u MClimate CO2 Sensor and MClimate CO2 Sensor and Sofia, Bulgaria Notifier LoRaWAN® Notifier LoRaWAN®, escanee Sofia Tech Park, installeert, scan de QR-code el código QR o visite el...
-
Page 3: Table Of Contents
What’s inside the box? What is in the box? Technical details, Safety instructions, Legal Notices & Compatibility Device Parts, Mechanical dimensions CO2 Calibration mechanism and your MClimate CO2 Sensor and first steps with the device Notifier LoRaWAN® LED, Buttons and behaviour Commissioning Installation... -
Page 4: Legal Notices & Compatibility
/ or other product Material: ABS specifications are subject to change without Environmental conditions, in which the device is notice. MClimate retains all rights to review or intended to operate: update its products, software or documentation - Indoor using;... -
Page 5: Device Parts, Mechanical Dimensions
Device parts Batteries holder Buzzer Status LED status Status button status button Assembled MClimate CO2 Sensor Disassembled MClimate CO2 Sensor and Notifier LoRaWAN®, top view and Notifier LoRaWAN®, top view... - Page 6 Calibration The device comes pre-calibrated with ABC algorithm enabled. By default, the ABC algorithm is based on a 8-day period. It keeps a log of the minimum measured CO2 in ppm and at the end of the period considers the minimum value as if it was 400 for the next period.
-
Page 7: Led, Buttons And Behaviour
LED, Buttons and behaviour When you press the button, the device indicates the current: 1. CO2 Level - Green: Good CO2 levels (less than 900ppm by default) - Yellow: Medium CO2 levels (>900ppm and <1500ppm) - Red: Bad CO2 levels (>1500ppm) Connection status - Constant indication: The device is connected to a LoRaWAN®... - Page 8 Warning: CO2 levels thresholds as well as the color of the indication can be changed through a downlink command. LED status Status button Connector for optional external 10K NTC temperature sensor. Acoustic alarm: The acoustic alarm activates when the CO2 reading is in medium or bad level.
-
Page 9: Commissioning
Commissioning Open your LoRaWAN® Network provider After pulling away the protective film access panel and add the device using from the batteries, the device will the supplied Serial Number, DevEUI, automatically connect to the network. In AppEUI (JoinEUI) and AppKey. order to see whether the device has connected to the network, please check LED, Buttons and behaviour. -
Page 10: Installation
We recommend installing the device so that the QR code with the serial number stays on the bottom-right side of the device in order to ensure good measurements. 1.1 cm 3 cm 0.5 cm 0.5 cm 5.5 cm Screw holes Disassembled MClimate CO2 Sensor and Notifier LoRaWAN®, back view... -
Page 11: Installation Of External Temperature Sensor (Ntc)
Installation of external temperature sensor (NTC) MClimate CO2 Sensor measures ambient temperature and relative humidity using a digital temperature sensor. The device also supports installing an additional temperature sensor (NTC) in cases where you want to monitor e.g. pipe surface temperature. - Page 12 Designed & Manufactured by MClimate in Europe. last update: 29.05.2024...
Need help?
Do you have a question about the CO2 Sensor and Notifier LoRaWAN and is the answer not in the manual?
Questions and answers