Neck Strap - Vortex RAZOR UHD Product Manual

ACCESSORIES
GlassPak Pro Binocular Harness
™
Smartly designed for multi-day hunts,
the GlassPak Pro modular chest-harness
™
system is design for comfort, durability,
and lightning-fast access to critical gear.
Follow these steps to adjust the fit of your harness.
1. Position the harness with the stitched logo
facing outward with the G-hooks at the top
and the side-release buckles at the bottom.
2. Clip the G-hooks into the loops at the top of
the backside of the case.
3. Slip the harness over your head so that the
harness is on your back and the case is on
your chest.
4. Snap the side-release buckles to the buckles
at the bottom of the backside of the case.
Adjust the straps to fit your body snugly so
the harness is positioned high and tight on
your chest.
5. Roll up and secure any loose straps at the
top of the harness.
6. Thread the binocular tether straps through
the strap attachments on the binocular.
Thread the binocular tether straps back
through the tether strap buckles to secure.
6
Lens Covers
The Razor UHD comes with Tethered Objective Lens Covers and
®
a Rainguard for the Ocular Lenses. Use these covers to protect the
lenses whenever you are not using your binocular.

Neck Strap

Attach the padded Neck Strap in these three simple steps:
1. Push a few inches of 2. Hold the buckle
the strap through the and thread the end
Strap Attachment on of the strap through
the binocular. the buckle.
Note: If using another type of strap, never attach metal O-rings directly onto
the Strap Attachment.
RAZOR ®
UHD
3. Adjust the overall
length, then pull
tight until the strap
is secured within
the buckle.
7